BUSHING 1540180 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissions durability period), as defined by regulation. All prescribed maintenance requirements must be followed.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Circuit Breakers - Reset
DEF Filler Screen - Clean
Engine Compartment - Clean
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Fuel System - Prime
Fuses - Replace
Hydraulic Tank Breaker Relief Valve - Clean
Oil Filter - Inspect
Fuel Tank Water and Sediment - Drain
Windows - Clean
Every 10 Service Hours or Daily
Cooling System Coolant Level - Check
Engine Oil Level - Check
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Level - Check
Pump Drive Oil Level - Check
Seat Belt - Inspect
Transmission Gearbox Oil Level - Check
Every 50 Service Hours
Tire Inflation - Check
Every 50 Service Hours or Weekly
Differential and Final Drive Oil Level - Check
Linkage - Lubricate
Every 250 Service Hours or Monthly
Transmission Gearbox Oil Sample - Obtain
Brake Accumulator (Service) - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Differential and Final Drive Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Pump Drive Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Fuel Tank Cap and Strainer - Clean
Fuel System Primary Filter (Water Separator) Element - Replace
Cooling System Coolant Sample (Level 1) - Obtain
Every 1000 Service Hours
Battery Hold-Down - Tighten
Rollover Protective Structure (ROPS) - Inspect
Every 1500 Service Hours
Engine Crankcase Breather Element - Replace
Every 2000 Service Hours or 1 Year
Brake Discs - Check
Differential and Final Drive Oil - Change
DEF Filler Screen - Clean
Hydraulic System Oil - Change
Pump Drive Oil - Change
Receiver Dryer (Refrigerant) - Replace
Cooling System Coolant Extender (ELC) - Add
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 6000 Service Hours or 3 Years
Cooling System Water Temperature Regulator - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change