1620151 BUSHING Caterpillar parts
24H, 3408E, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 844, 988B, 988F II, 990, 990 II, 992C, AD40, AE40, C3...
Rating:
Alternative (cross code) number:
CA1620151
162-0151
1620151
CA1620151
162-0151
1620151
Weight: 0.06 pounds 0 kg.
COLD PLANER, WHEEL TRACTOR,
Compatible equipment models: 1620151:
Number on catalog scheme:
4A
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
Before you remove the air intake shutoff, pull the trip knob on the air intake shutoff or press the emergency stop button in order to release the blade latch. If the blade latch is released after the air intake shutoff is removed, serious personal injury can result.
Manually release the air shutoff. Pull or press in order to release the knob on the air shutoff. Ensure that the indicator on the air shutoff points straight down to the "OFF" position. If the air shutoff did not trip, refer to Troubleshooting, "Air Shutoff System".
Illustration 1 g01303618
Disconnect tube assembly (1) from air shutoff (4).
Disconnect air inlet hose (5) by loosening bolts (2) from adapter (3) on air shutoff (4).
Remove bolts (6) and the washers that mount air shutoff (4) to the intake manifold.
Remove air shutoff (4) and remove the gasket. Note: Inspect the lines of the air intake for debris.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01303618
Install a new gasket and air shutoff (4) to the intake manifold. Install bolts (6) and the washers and tighten bolts (6) to a torque of 25 6 N m (18 4 lb ft).
Reconnect air inlet hose (5). Install bolts (2) to adapter (3) and tighten bolts (2) to a torque of 25 6 N m (18 4 lb ft).
Reconnect tube assembly (1) to air shutoff (4).
Reset the indicator on the air shutoff. Ensure that the arrow on the indicator is pointing straight up to the "OPEN" position.
Test air shutoff (4) for proper operation and refer to Operation And Maintenance Manual, "Air Shutoff".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
Before you remove the air intake shutoff, pull the trip knob on the air intake shutoff or press the emergency stop button in order to release the blade latch. If the blade latch is released after the air intake shutoff is removed, serious personal injury can result.
Manually release the air shutoff. Pull or press in order to release the knob on the air shutoff. Ensure that the indicator on the air shutoff points straight down to the "OFF" position. If the air shutoff did not trip, refer to Troubleshooting, "Air Shutoff System".
Illustration 1 g01303618
Disconnect tube assembly (1) from air shutoff (4).
Disconnect air inlet hose (5) by loosening bolts (2) from adapter (3) on air shutoff (4).
Remove bolts (6) and the washers that mount air shutoff (4) to the intake manifold.
Remove air shutoff (4) and remove the gasket. Note: Inspect the lines of the air intake for debris.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01303618
Install a new gasket and air shutoff (4) to the intake manifold. Install bolts (6) and the washers and tighten bolts (6) to a torque of 25 6 N m (18 4 lb ft).
Reconnect air inlet hose (5). Install bolts (2) to adapter (3) and tighten bolts (2) to a torque of 25 6 N m (18 4 lb ft).
Reconnect tube assembly (1) to air shutoff (4).
Reset the indicator on the air shutoff. Ensure that the arrow on the indicator is pointing straight up to the "OPEN" position.
Test air shutoff (4) for proper operation and refer to Operation And Maintenance Manual, "Air Shutoff".
Cat SIS web machinery list:
Parts bushing Caterpillar catalog:
768C, 769C, 772, 992
69D, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772B, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM
740, 740B, AD40, AD45, AD55, AD55B, AD60, AE40, AE40 II, D25C, D25D, D30C, D350C, D350E, D350E II, D35C, D35HP, D400, D400E, D400E II, D40D, D44B, D550B, R2900
24H, 24M, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 350, ...
D9R, D9T
D10N, D10R, D10T, D10T2
824G II, 824H, 844, 844H, 854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
10, D10, D11N, D11R, D11T, D9L
D10N, D9L
D10N, D10R, D10T
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
0115240
BUSHING-PIPE
30/30, 3406, 3406B, DEUCE, PM-565
30/30, 3406, 3406B, DEUCE, PM-565
2014337
BUSHING
3512, 3512B, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, PM3412, PM3508, PM3512, PM3516, PMG3516
3512, 3512B, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, PM3412, PM3508, PM3512, PM3516, PMG3516
3B7724
BUSHING-REDUCER
1673, 1673B, 3516, 768B, 769, D330A, D333A, D346, D348, D353C, D379, D379A, D397D, D398, D398A, G3306, G3406, G3408, G3408C, G3412, G3412C, G342C, G343, G353D, G379, G398, G399
1673, 1673B, 3516, 768B, 769, D330A, D333A, D346, D348, D353C, D379, D379A, D397D, D398, D398A, G3306, G3406, G3408, G3408C, G3412, G3412C, G342C, G343, G353D, G379, G398, G399
3675994
BUSHING-REDUCER
3176C, 3196, C-12, C12
3176C, 3196, C-12, C12
3406B, 3406C, 3406E, 3456, 375 L, 385B, 5090B, 578, 583R, 621G, 623G, 627G, 651B, 735, 824C, 824G, 825G, 826C, 826G, 834G, 836G, 980C, 980G, 988G, C-15, C-16, C16, D8N, D8R, D8R II, PM3456
16G, 16H NA, 3406B, 3406C, 3408B, 3408C, 3412, 3412C, 375, 375 L, 5080, 578, 583R, 587R, 621F, 623E, 623F, 627B, 627F, 814B, 824C, 824G, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D400, D400E...
1947155
BUSHING-RUBBER
3054, 3054B, 3056
3054, 3054B, 3056
1954657
BUSHING AS
3054, 3054B, 3056, C4.4
3054, 3054B, 3056, C4.4
3056, 914G, IT14G, M312, M315
8L6376
BUSHING
3508, 3508C, 3512, 3512B, 3516, G3304, G3306, G3406, PM3512, PM3516
3508, 3508C, 3512, 3512B, 3516, G3304, G3306, G3406, PM3512, PM3516
24H, 3408E, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 844, 988B, 988F II, 990, 990 II, 992C, AD40, AE40, C3...
24H, 3408E, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 844, 988B, 988F II, 990, 990 II, 992C, AD40, AE40, C3...