BUSHING-SLEEVE 1754071 - Caterpillar

Illustration 1 g02539718
Table 1
Specification for 189-5433 Engine Oil Filter Gp
Item Qty Part Specification Description
1 2 242-3864 Spring Length under test force is 43.18 mm (1.700 inch).
Test force is 43.7 N (9.8 lb).
Free length after test is 58.50 0.50 mm (2.303 0.020 inch).
2 10 6V-2317 Bolt 1. Torque to 28 7 N m (21 5 lb ft) in a numerical sequence as shown in Illustration 1.
2. Again, torque to 28 7 N m (21 5 lb ft) in a numerical sequence as shown in Illustration 1.
3 3 8T-0276 Bolt
4 2 9X-2098 Taperlock Stud
5 2 2P-2537 Hollow Stud Apply 154-9731 Thread Lock Compound to the tapered end of the hollow stud to a distance of 7.5 1.5 mm (0.30 0.06 inch).
Torque to 68 7 N m (50 5 lb ft).
6 1 8C-3446 Fluid Sampling Valve Torque to 11 to 13 N m (97 to 115 lb in).
7 1 1R-1807 Engine Oil Filter As Use clean engine oil to lubricate the oil filter seal. Tighten the engine oil filter assembly until the oil filter seal contacts the base. Hand tighten the engine oil filter assembly for an additional 3/4 turn (270 degrees).