1865689 BUSHING Caterpillar parts
365B, 365B II, 365C, 385C, 385C FS, 5090B
Rating:
Alternative (cross code) number:
CA1865689
186-5689
1865689
CA1865689
186-5689
1865689
Weight: 19 pounds 8 kg.
EXCAVATOR, FRONT SHOVEL,
Compatible equipment models: 1865689:
Number on catalog scheme:
1E
For full view, you need register
Information:
Product Identification Number (PIN) and CE Plate
Illustration 1 g00675011The PIN plate is positioned on the front of the machine, close to the operator compartment.
Illustration 2 g02436556Model number (A)____________________Machine PIN (B)____________________Service Information Plate (C)____________________Year of Manufacture (If Required) (D)____________________CE Plate (If Required) (E)Country of Origin Info Plate (If Required) (F)Local regulation may require documentation of the Year of Manufacture in the OMM. Comply with these regulations.CE Plate
Note: The CE plate is on machines that are going into the European Union.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. Several pieces of information are stamped onto the "CE" plate.
Illustration 3 g01883459For machines that are compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided.
Primary Engine Power (kW)____________________
Additional Engine Power (kW)____________________
Typical Machine Weight (kg)____________________
Year of Construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.Machine Specification Film
The machine specification film is on machines that are going into Japan.The Japanese Industrial Safety and Health Act requires machine specifications to be displayed on a film that can easily be seen by the operator. If equipped, this film will be located on the cab door.
Illustration 4 g03105980Engine Serial Number
This label is located on the engine.Engine Serial Number ____________________Sound Certification Film
If equipped, this label is located on the cab door.
Illustration 5 g02793636If equipped, the certification label is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".
Illustration 6 g03105800
(A) Low Noise Film
(B) Super Low Noise Film If equipped, these certification labels are used to verify the Japan Ministry of Land, Infrastructure, Transportation, and Tourism (MLIT) noise designation according to the Japan "Designation Rule of Low Noise Type Contrsuction Machine".Low Noise (A) - Verifies that the Japan "MLIT" designates the machine as a "Low Noise" type construction machine.Super Low Noise (B) - Verifies that the Japan "MLIT" designates the machine as a "Super Low Noise" type construction machine.
Illustration 1 g00675011The PIN plate is positioned on the front of the machine, close to the operator compartment.
Illustration 2 g02436556Model number (A)____________________Machine PIN (B)____________________Service Information Plate (C)____________________Year of Manufacture (If Required) (D)____________________CE Plate (If Required) (E)Country of Origin Info Plate (If Required) (F)Local regulation may require documentation of the Year of Manufacture in the OMM. Comply with these regulations.CE Plate
Note: The CE plate is on machines that are going into the European Union.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. Several pieces of information are stamped onto the "CE" plate.
Illustration 3 g01883459For machines that are compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided.
Primary Engine Power (kW)____________________
Additional Engine Power (kW)____________________
Typical Machine Weight (kg)____________________
Year of Construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.Machine Specification Film
The machine specification film is on machines that are going into Japan.The Japanese Industrial Safety and Health Act requires machine specifications to be displayed on a film that can easily be seen by the operator. If equipped, this film will be located on the cab door.
Illustration 4 g03105980Engine Serial Number
This label is located on the engine.Engine Serial Number ____________________Sound Certification Film
If equipped, this label is located on the cab door.
Illustration 5 g02793636If equipped, the certification label is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".
Illustration 6 g03105800
(A) Low Noise Film
(B) Super Low Noise Film If equipped, these certification labels are used to verify the Japan Ministry of Land, Infrastructure, Transportation, and Tourism (MLIT) noise designation according to the Japan "Designation Rule of Low Noise Type Contrsuction Machine".Low Noise (A) - Verifies that the Japan "MLIT" designates the machine as a "Low Noise" type construction machine.Super Low Noise (B) - Verifies that the Japan "MLIT" designates the machine as a "Super Low Noise" type construction machine.
Caterpillar parts catalog:
Parts bushing Caterpillar catalog:
330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345C MH, 3...
320B, 320N, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 325C, 330, 330B, 330B L, 385B, 385C, 385C L, 390D, 390D L, 390F L, G107B, TK1051
321C, 321D LCR, 322B LN, 322C, 325C, 325C FM, 325D L, 328D LCR, 330C, 330C L, 330D L, 345B II, 345C L, 365B II, 365C, 365C L, 385B, 385C L
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 365B, 365C, W345C MH
325D, 325D FM, 325D FM LL, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 365B, 365C, W345C MH
324D, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 34...
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385C, P115, VPC-30
365B, 365B II, 365B L, 365C, 385B, S365B, S365C, S465, VHS-60/3
345C, 345C L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L
345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385C
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385C, 390D, 390D L, 390F L
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
1865688
BUSHING
385C, 385C FS, 5090B
385C, 385C FS, 5090B
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
345B II, 365B, 365B II, 365B L, 375, 385B, 5080, 5090B
8E1887
BUSHING-MASTER
345B II, 365B, 365B II, 365B L, 375, 385B, 5080, 5090B
345B II, 365B, 365B II, 365B L, 375, 385B, 5080, 5090B
1735933
BUSHING
5110B
5110B
1659371
BUSHING
5110B
5110B
2145733
BUSHING
AD55, AD55B, AD60
AD55, AD55B, AD60
2030376
BUSHING-REDUCER
AD45, AD45B, AD55, AD55B, AE40 II
AD45, AD45B, AD55, AD55B, AE40 II
1979109
BUSHING-REDUCER
AD30, AD45, AD45B, AD55, AD55B, AD60, AE40 II
AD30, AD45, AD45B, AD55, AD55B, AD60, AE40 II
1044827
BUSHING
515, 525, AD45B, AD55
515, 525, AD45B, AD55
3290667
BUSHING-REDUCER
AD45B, AD55, AD55B, AD60
AD45B, AD55, AD55B, AD60
1865690
BUSHING
365B, 365B II, 365C, 385C, 385C FS, 5090B
365B, 365B II, 365C, 385C, 385C FS, 5090B