BUSHING 1F1278 - Caterpillar

Parts to be fastened must be free of paint at joint and bolt washer areas.(1) Torque for bolts holding rear support to frame ... 950 50 lb. ft.(1300 70 N m)(2) Supports to be assembled with this surface in contact with flywheel housing support pad.(3) Torque for bolts holding front support to frame ... 350 25 lb. ft.(470 35 N m)(4) Torque for bolts holding support to flywheel housing: a. Tighten bolts to ... 150 lb. ft.(205 N m)b. Put a mark on each bolt and support.c. Tighten each bolt from mark ... 120 5° Put 2P2506 Anti-Seize Compound on threads and face of washers before assembly.(5) Install bushing assembly with notch at bottom.