2037343 BUSHING Caterpillar parts
330C, 330C L
Rating:
Alternative (cross code) number:
CA2037343
203-7343
2037343
CA2037343
203-7343
2037343
Weight: 3 pounds 1 kg.
Information:
ID
80.25
mm
OD
95.18
mm
WIDTH
110
mm
EXCAVATOR,
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
YNRSP 2037343 Sleeve Bearing Fits Model C-9/330C/330C L/330C LN (1Pcs)
YNRSP Brand: YNRSP || Part Number: 2037343 || Part type: Sleeve Bearing || Weight: 3.74 lbs (1.7 kg) || Fits Model: C-9, 330C, 330C L, 330C LN
YNRSP Brand: YNRSP || Part Number: 2037343 || Part type: Sleeve Bearing || Weight: 3.74 lbs (1.7 kg) || Fits Model: C-9, 330C, 330C L, 330C LN
Hacus - Forklift FPE326748 Plate - Brake WEAR Part Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Number on catalog scheme:
For full view, you need register
Information:
Engine Events
Engine events are abnormal engine operating conditions such as low oil pressure or high coolant temperature. If an engine event is detected by the engine Electronic Control Module (ECM), the ECM will generate a code. The code will be an event code if the technician is monitoring the code over the Cat Data Link. If the technician is monitoring the code over the CAN data link, the code will be a Suspect Parameter Number (SPN) - Failure Mode Identifier (FMI) code. The codes aid the service technician in identifying the nature of the problem. The technician must have access to a diagnostic tool to read information about the code. There are two types of data links that are used for communication with the engine ECM. Each data link displays the code in a different way. The data links are described below.Cat Data Link
The Cat Data Link is used by the engine ECM to communicate with Caterpillar controllers or Caterpillar display modules. Caterpillar Electronic Technician (ET) is a software program that is designed to run on a personal computer. Cat ET can be used by the service technician to view information about an event code that is generated by the engine ECM. The following term describes the elements of the event code:Event Code - The "E" identifies the code as an event code. The "XXX(X)" represents a numeric identifier for the event code. The fourth "(X)" assigns one of three levels to the active event code according to the severity of the abnormal system condition. The warning category indicator is followed by a description of the code. Refer to the following example:
E360(1) Low Engine Oil Pressure
E360(2) Low Engine Oil Pressure
E360(3) Low Engine Oil PressureThree possible responses may be available for each parameter. Some of the responses are not available for some of the parameters. Refer to Table 1.
Table 1
Indicators (1), (2), and (3)
Warning Category Indicator Severity
(1) Least Severe
(2) Moderate Severity
(3) Most Severe The definition for the levels of severity for an event are defined below:Level (1) - Level (1) requires no immediate action. The system may need attention soon. Check on the condition or service the system at the earliest possible time.Level (2) - Level (2) requires a change in the operation of the engine or the performance of a maintenance procedure. Failure to correct the problem may result in damage to the engine components.Level (3) - Level (3) requires an immediate safe shutdown of the engine to avoid damage to the engine or injury to personnel around the engine. The problem that caused the event must be corrected before engine operation can resume.CAN Data Link
The CAN data link is used by the engine ECM to communicate with aftermarket controllers or display modules. The CAN data link is referred to as the J1939 data link. When a diagnostic code is activated, the ECM can transmit information about the code over the J1939 data link to aftermarket controllers. The code will be displayed as a two-element code. The following
Engine events are abnormal engine operating conditions such as low oil pressure or high coolant temperature. If an engine event is detected by the engine Electronic Control Module (ECM), the ECM will generate a code. The code will be an event code if the technician is monitoring the code over the Cat Data Link. If the technician is monitoring the code over the CAN data link, the code will be a Suspect Parameter Number (SPN) - Failure Mode Identifier (FMI) code. The codes aid the service technician in identifying the nature of the problem. The technician must have access to a diagnostic tool to read information about the code. There are two types of data links that are used for communication with the engine ECM. Each data link displays the code in a different way. The data links are described below.Cat Data Link
The Cat Data Link is used by the engine ECM to communicate with Caterpillar controllers or Caterpillar display modules. Caterpillar Electronic Technician (ET) is a software program that is designed to run on a personal computer. Cat ET can be used by the service technician to view information about an event code that is generated by the engine ECM. The following term describes the elements of the event code:Event Code - The "E" identifies the code as an event code. The "XXX(X)" represents a numeric identifier for the event code. The fourth "(X)" assigns one of three levels to the active event code according to the severity of the abnormal system condition. The warning category indicator is followed by a description of the code. Refer to the following example:
E360(1) Low Engine Oil Pressure
E360(2) Low Engine Oil Pressure
E360(3) Low Engine Oil PressureThree possible responses may be available for each parameter. Some of the responses are not available for some of the parameters. Refer to Table 1.
Table 1
Indicators (1), (2), and (3)
Warning Category Indicator Severity
(1) Least Severe
(2) Moderate Severity
(3) Most Severe The definition for the levels of severity for an event are defined below:Level (1) - Level (1) requires no immediate action. The system may need attention soon. Check on the condition or service the system at the earliest possible time.Level (2) - Level (2) requires a change in the operation of the engine or the performance of a maintenance procedure. Failure to correct the problem may result in damage to the engine components.Level (3) - Level (3) requires an immediate safe shutdown of the engine to avoid damage to the engine or injury to personnel around the engine. The problem that caused the event must be corrected before engine operation can resume.CAN Data Link
The CAN data link is used by the engine ECM to communicate with aftermarket controllers or display modules. The CAN data link is referred to as the J1939 data link. When a diagnostic code is activated, the ECM can transmit information about the code over the J1939 data link to aftermarket controllers. The code will be displayed as a two-element code. The following
Caterpillar parts catalog:
Parts bushing Caterpillar catalog:
330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345C MH, 3...
320 L, 322, 322 LN, 322B, 322B L, 322B LN, 322C, 325, 325 L, 325 LN, 325B, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 385B
322B LN, 322C, 324D, 325B L, 325C, 325D L, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336E L, 340D L, 385C L
321C, 321D LCR, 322B LN, 322C, 325C, 325C FM, 325D L, 328D LCR, 330C, 330C L, 330D L, 345B II, 345C L, 365B II, 365C, 365C L, 385B, 385C L
320C, 322C, 325C, 325C FM, 330C, 330C L, 385B, 385C L
322C, 325C, 330C, 330C FM, 330C L, 385B, 385C L
322C, 325C, 330C, 330C FM, 330C L, 385B, 385C L
321C, 322C, 325C, 330C, 330C FM, 330C L, 385B
325C, 330C, 330C FM, 330C L, 330D L
330C, 330C FM, 330C L
330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L
330C, 330C L, 345B II, 345B L
2012786
BUSHING
325C, 325C FM
325C, 325C FM
1865465
BUSHING
325C, 325C FM, 328D LCR, 330C, 330C L
325C, 325C FM, 328D LCR, 330C, 330C L
1865476
BUSHING
325C, 325C FM, 325C L, 328D LCR
325C, 325C FM, 325C L, 328D LCR
345B II
1864474
BUSHING
W330B
W330B
365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
325C, 325C FM
1984344
BUSHING
M325B
M325B
1800710
BUSHING
M325B
M325B
2444149
BUSHING
365C, 385B, 385C, 385C L, 385C L MH
365C, 385B, 385C, 385C L, 385C L MH
1722865
BUSHING
365B, 385B
365B, 385B
2037366
BUSHING
330C, 330C L
330C, 330C L