2D4187 BUSHING Caterpillar parts
120, 120B, 12E
Rating:
Alternative (cross code) number:
CA2D4187
2D-4187
2D4187
CA2D4187
2D-4187
2D4187
Weight: 0.72 pounds 0 kg.
Information:
ID
47.816
mm
OD
57.188
mm
WIDTH
53.85
mm
MOTOR GRADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$11.59
01 Sep 2023
Amazon.com
CTP 2D4187 Bushing Sleeve Bearing
CTP Bushing Sleeve Bearing || Sold in each || Easy in-and-out fit
CTP Bushing Sleeve Bearing || Sold in each || Easy in-and-out fit
$36.77
15 Jun 2023
Amazon.com
CTP 2D4187 Bushing Sleeve Bearing
CTP Bushing Sleeve Bearing || Sold in each || Easy in-and-out fit
CTP Bushing Sleeve Bearing || Sold in each || Easy in-and-out fit
$35.89
24 May 2023
Amazon.com
CTP 2D4187 Bushing Sleeve Bearing
CTP Bushing Sleeve Bearing || Sold in each || Easy in-and-out fit
CTP Bushing Sleeve Bearing || Sold in each || Easy in-and-out fit
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02673920
Illustration 2 g02815777
Make temporary marks on the alternator harness in order to identify the locations for the connections during the assembly procedure.
Disconnect the harness assembly from alternator (6).
Support the weight of the alternator and remove nut (1) and bolt (2).
Remove nut (3) and bolt (5) (not shown) from alternator (6).
Remove alternator (6) from alternator bracket (4).
If necessary, follow Step 7.a through Step 7.e in order to remove pulley (7) from alternator (6). Note: Either of Tooling (A) may be required in order to carry out the removal of the alternator pulley.
Place the alternator in a suitable support.
Hold shaft (9) of alternator (6) with a suitable tool. Use a cranked ring spanner to loosen nut (8).
Make a temporary mark on pulley (7) in order to show the correct orientation.
Remove nut (8) and pulley (7) from shaft (9).
Remove fan (10) from shaft (9).
Illustration 3 g02815797
If necessary, follow Step 8.a through Step 8.c in order to remove tensioner (11) and alternator bracket (14) from the cylinder block.
Remove bolt (12) and remove tensioner bracket (11).
If necessary, remove bolt (14) (not shown) from the coolant tube assembly.
Remove bolts (13) from alternator bracket (15). Remove the alternator bracket from the cylinder block. Note: Support the weight of the alternator bracket as the bolts are removed.
Start By:
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02673920
Illustration 2 g02815777
Make temporary marks on the alternator harness in order to identify the locations for the connections during the assembly procedure.
Disconnect the harness assembly from alternator (6).
Support the weight of the alternator and remove nut (1) and bolt (2).
Remove nut (3) and bolt (5) (not shown) from alternator (6).
Remove alternator (6) from alternator bracket (4).
If necessary, follow Step 7.a through Step 7.e in order to remove pulley (7) from alternator (6). Note: Either of Tooling (A) may be required in order to carry out the removal of the alternator pulley.
Place the alternator in a suitable support.
Hold shaft (9) of alternator (6) with a suitable tool. Use a cranked ring spanner to loosen nut (8).
Make a temporary mark on pulley (7) in order to show the correct orientation.
Remove nut (8) and pulley (7) from shaft (9).
Remove fan (10) from shaft (9).
Illustration 3 g02815797
If necessary, follow Step 8.a through Step 8.c in order to remove tensioner (11) and alternator bracket (14) from the cylinder block.
Remove bolt (12) and remove tensioner bracket (11).
If necessary, remove bolt (14) (not shown) from the coolant tube assembly.
Remove bolts (13) from alternator bracket (15). Remove the alternator bracket from the cylinder block. Note: Support the weight of the alternator bracket as the bolts are removed.
Caterpillar parts catalog:
Parts bushing Caterpillar catalog:
120B, 12E, 140, 140B
120B, 12E, 140, 140B
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E
120, 120B, 12E, 140, 140B
120B, 12E, 140, 140B
120B, 12E, 140, 140B
120B, 12E, 140B
12E
120, 120B, 12E, 140, 140B
120, 120B, 12E
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 140, 140B
1F2692
BUSHING
120B, 12E, 140, 140B
120B, 12E, 140, 140B
7D1963
BUSHING
14E
14E
6D9735
BUSHING
12F, 14E, 16
12F, 14E, 16
5H6188
BUSHING
14E
14E
6D6339
BUSHING
12F, 12G, 140G, 14E, 14G, 16, 16G
12F, 12G, 140G, 14E, 14G, 16, 16G