2K4512 BUSHING Caterpillar parts
824B, 834, 955C, 955H, 980, 980B, 988
Rating:
Alternative (cross code) number:
CA2K4512
2K-4512
2K4512
CA2K4512
2K-4512
2K4512
Weight: 1 pounds 0 kg.
Information:
ID
57.31
mm
OD
69.88
mm
WIDTH
56.4
mm
TRACK LOADER, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
YNRSP 2K4512 Sleeve Bearing for Heavy Equipment
YNRSP Brand: YNRSP (Reliable Spare Parts) || Part Number: 2K4512 || Part Type: Sleeve Bearing || Weight: 1.32 lbs (0.6 kg) || Easy in-and-out fit
YNRSP Brand: YNRSP (Reliable Spare Parts) || Part Number: 2K4512 || Part Type: Sleeve Bearing || Weight: 1.32 lbs (0.6 kg) || Easy in-and-out fit
CTP 2K4512 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 2K4512:
Information:
Remove Water Pump
1. Drain the cooling system. 2. Loosen hose clamp (1). Remove water temperature regulator bypass line (2).3. Remove the pipe-to-water pump mounting bolts (4).4. Remove oil cooler water line mounting nuts (3).5. Install two 3/8"-16 NC forged eyebolts in water pump. Attach a hoist and remove the water pump mounting nuts (5). Remove the water pump- weight 80 lbs. (36 kg).Install Water Pump
1. Attach a hoist and position the water pump on engine. Install mounting nuts.2. Install the four oil cooler water line mounting bolts.3. Install cylinder block-to-pump water line mounting bolts.4. Install water temperature regulator bypass line and tighten hose clamp.5. Fill cooling system.Disassemble Water Pump (Earlier Engine)
preparatory step: a) remove water pump1. Remove the water pump inlet elbow. Remove the housing assembly-to-body retaining nuts and washers. Remove the housing assembly. 2. Remove the impeller retaining nut, washer and cotter pin. Using tool setup (A) and suitable washers, remove the impeller and seal ring. 3. Remove the water pump drive gear retaining nut and lock. Install tool setup (B) and remove the pump drive gear and key.4. Remove the bearing retainer mounting bolts and locks. Remove the bearing retainer. Remove the bearing assemblies and shaft. Press the bearing assemblies and spacer from shaft.5. Remove the impeller carbon seal assembly from the body. Remove the lip-type seal and O-ring seal from the body.Assemble Water Pump (Earlier Engine)
1. Install the carbon seal assembly (1) into the water pump body using tool setup (A). Install the lip-type seal in body using tool setup (A). Lip of seal should be toward drive gear when installed. Lubricate lip of seal with lubricant being sealed.2. Press the bearing assemblies and spacer onto the shaft. Install the shaft in body. Install the bearing retainer, mounting bolts and locks.3. Install the water pump drive gear and key. Install retaining nut and lock. Tighten nut (4) to 180 5 lb. ft. (24,9 0,7 mkg). and bend lock.4. Install seal ring (2) on the shaft with the polished surface of ring against carbon surface of seal. Install the impeller, retaining nut and washer. Tighten nut (3) to 70 5 lb. ft. (9,7 0,7 mkg) and install the cotter pin. 5. Install the housing assembly and retaining nuts. Install the water pump inlet elbow.concluding step: a) install water pump
1. Drain the cooling system. 2. Loosen hose clamp (1). Remove water temperature regulator bypass line (2).3. Remove the pipe-to-water pump mounting bolts (4).4. Remove oil cooler water line mounting nuts (3).5. Install two 3/8"-16 NC forged eyebolts in water pump. Attach a hoist and remove the water pump mounting nuts (5). Remove the water pump- weight 80 lbs. (36 kg).Install Water Pump
1. Attach a hoist and position the water pump on engine. Install mounting nuts.2. Install the four oil cooler water line mounting bolts.3. Install cylinder block-to-pump water line mounting bolts.4. Install water temperature regulator bypass line and tighten hose clamp.5. Fill cooling system.Disassemble Water Pump (Earlier Engine)
preparatory step: a) remove water pump1. Remove the water pump inlet elbow. Remove the housing assembly-to-body retaining nuts and washers. Remove the housing assembly. 2. Remove the impeller retaining nut, washer and cotter pin. Using tool setup (A) and suitable washers, remove the impeller and seal ring. 3. Remove the water pump drive gear retaining nut and lock. Install tool setup (B) and remove the pump drive gear and key.4. Remove the bearing retainer mounting bolts and locks. Remove the bearing retainer. Remove the bearing assemblies and shaft. Press the bearing assemblies and spacer from shaft.5. Remove the impeller carbon seal assembly from the body. Remove the lip-type seal and O-ring seal from the body.Assemble Water Pump (Earlier Engine)
1. Install the carbon seal assembly (1) into the water pump body using tool setup (A). Install the lip-type seal in body using tool setup (A). Lip of seal should be toward drive gear when installed. Lubricate lip of seal with lubricant being sealed.2. Press the bearing assemblies and spacer onto the shaft. Install the shaft in body. Install the bearing retainer, mounting bolts and locks.3. Install the water pump drive gear and key. Install retaining nut and lock. Tighten nut (4) to 180 5 lb. ft. (24,9 0,7 mkg). and bend lock.4. Install seal ring (2) on the shaft with the polished surface of ring against carbon surface of seal. Install the impeller, retaining nut and washer. Tighten nut (3) to 70 5 lb. ft. (9,7 0,7 mkg) and install the cotter pin. 5. Install the housing assembly and retaining nuts. Install the water pump inlet elbow.concluding step: a) install water pump
Cat SIS web machinery list:
Parts bushing Caterpillar catalog:
561B, 951B, 955C, 955H, 955K, 977D
14E, 930, 950, 955C, 955H, 966C
322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 528, 657G, 824C, 826C, 834B, 834G, 834H, ...
955C, 955H
950, 955C, 955H
955C
611, 613C, 613C II, 613G, 615C, 621, 621B, 623, 627B, 631C, 633C, 641, 641B, 651, 657B, 814, 824B, 825B, 826B, 834, 950, 966C, 980, 980B, 988, 992
928HZ, 930G, 950K, 962K, 988
518, 518C, 528, 650B, 651, 657, 666, 815, 824, 824B, 825B, 834, 910, 920, 930, 930R, 950, 966C, 966R, 980, 980B, 988, 992, FB518
824, 824B, 825B, 825C, 826B, 826C, 834, 834B, 836, 986H, 988, 988B, 988F, 988F II, 992, R1300, R1300G, R1300G II, R2900, R2900G, R3000H
824C, 980, 980B, 980C, 980F, R1700 II
824B, 824C, 825B, 825C, 826C, 966G, 966H, 980, 980B, 980C, 980F, 988, R1700 II
631C, 824B, 825B, 826B, 834, 950, 966C, 977D, 988
4H7046
BUSHING
977D
977D
0904469
BUSHING
D4H
D4H
9V0453
BUSHING
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16H NA, 24H, 814F, 815F, 910E, 916, 918F, 924F, 926,...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16H NA, 24H, 814F, 815F, 910E, 916, 918F, 924F, 926,...
1F6209
BUSHING
977D
977D
1F6207
BUSHING
977D
977D
D8L, D8N
5Y0671
BUSHING
D4E, D5B, D6D
D4E, D5B, D6D
2Y9251
BUSHING
D4E
D4E
950, 955C, 955H
955C, 955H
2K4514
BUSHING
955C, 955H
955C, 955H