BUSHING 3169822 - Caterpillar

Illustration 1 g03332821
(1) Camera View (2) Arrows Button (3) "OK" Button (4) Tab Button (5) Brightness Button (6) Alarm Acknowledge (7) Alarm (8) Product ID (9) System Status Indicator (10) Proximity BarDisplay Buttons
Arrow Button
Arrow button - The arrow button is used in order toperform the following functions:
Toggle the display between the camera views (front, rear,left, and right)
Highlight a selection (up/down and left/right)
Manually adjust brightness level after the brightness buttonis depressed (right/ left)OK Button
OK button - The "OK" button is used inorder to edit settings. The operator must press the "OK" buttonto enter the settings. After pressing the "OK" button,the first parameter in the list that can be configured will be highlighted.The highlighted parameter can then be changed. Tab Button
Tab button - Use the tab button in order to changethe active screen between the main screen, the configuration screen,and the diagnostic summary screen. The order of screens is defined in Illustration 2. Each arrow represents one press of thetab button.
Illustration 2 g03332830
(11) Main Screen (12) Configuration Screen (13) Diagnostic Summary ScreenBrightness Button
Illustration 3 g03334285
Brightness Bar example in Day Mode.
Brightness button - Press the brightness button momentarilyin order view the brightness slide bar and to allow manual adjustmentof the brightness for the display screen using the arrow keys. Pressand hold the brightness button for two seconds in order to enable/disablenight mode for the display screen. Note: The night mode will adjust the display to the minimumbrightness setting in order to reduce the amount of light emittedduring night time operation. The night mode brightness can be adjustedup or down and will be remembered the next time the night mode featureis enabled. When the display returns to the day mode the brightnesssetting will automatically adjust the 75 percent brightness. If necessary,adjust the brightness manually for personal view preferences.Alarm Acknowledge
Alarm Acknowledge - The alarm acknowledge button canbe used to silence the alarm. By pressing the alarm acknowledge button,the operator acknowledges the detection of and object. The alarm acknowledgefeature is only available when the alarm is active and will automaticallyturn off when there is a directional change (F/R) or when the systementers "STANDBY". If the object is still present or anew object appears, the system will sound the audible alarm again.The alarm acknowledge button also cancels any changes that were madein the configuration screen.