3665126 BUSHING-LOWER Caterpillar parts
H110E S
Rating:
Alternative (cross code) number:
CA3665126
366-5126
3665126
CA3665126
366-5126
3665126
Weight: 81 pounds 36 kg.
HAMMER,
Compatible equipment models: 3665126:
Information:
MID 87 - Chassis ECMCID 75 - Steering Oil Temperature SensorFMI 3 - Voltage Above Normal
Illustration 1 g01819553
"Steering Oil Temperature" sensor circuit
This diagnostic code indicates that the "Chassis ECM" detects the steering oil temperature sensor voltage is above normal.The following can cause this code:
Failed sensor
Open sensor supply circuit
Open sensor ground circuit
Signal circuit shorted to the +battery
Open signal circuit
Disconnected sensor
ECM failureSystem Response:The "Steering Oil Temperature" indication is one of the following:
Continuously at maximum temperature
Intermittently at maximum temperatureTest Step 1. CHECK FOR POWER AT THE SENSORDo not disconnect the sensor from the harness.
Turn on the disconnect switch and the key switch.
At the back of the harness connector for the sensor, insert a 7X-1710 Multimeter Probe along the voltage supply wire (contact A).
Measure the voltage from contact A to frame ground.Expected Result:The voltage is 8 0.5 VDC.Results:
OK - The voltage is 8 0.5 VDC. Proceed to Test Step 2.
NOT OK - The voltage is not 8 0.5 VDC. Proceed to
Illustration 1 g01819553
"Steering Oil Temperature" sensor circuit
This diagnostic code indicates that the "Chassis ECM" detects the steering oil temperature sensor voltage is above normal.The following can cause this code:
Failed sensor
Open sensor supply circuit
Open sensor ground circuit
Signal circuit shorted to the +battery
Open signal circuit
Disconnected sensor
ECM failureSystem Response:The "Steering Oil Temperature" indication is one of the following:
Continuously at maximum temperature
Intermittently at maximum temperatureTest Step 1. CHECK FOR POWER AT THE SENSORDo not disconnect the sensor from the harness.
Turn on the disconnect switch and the key switch.
At the back of the harness connector for the sensor, insert a 7X-1710 Multimeter Probe along the voltage supply wire (contact A).
Measure the voltage from contact A to frame ground.Expected Result:The voltage is 8 0.5 VDC.Results:
OK - The voltage is 8 0.5 VDC. Proceed to Test Step 2.
NOT OK - The voltage is not 8 0.5 VDC. Proceed to
Caterpillar parts catalog:
Parts bushing Caterpillar catalog:
3553934
BUSHING AS
H110E S
H110E S
3553936
BUSHING-UPPER
H110E S
H110E S
3553764
BUSHING AS
H110E S
H110E S
3553896
BUSHING AS
H110E S
H110E S
3553892
BUSHING-LOWER
H110E S
H110E S
3553898
BUSHING-UPPER
H110E S
H110E S
3553918
BUSHING-UPPER
H110E S
H110E S
3665125
BUSHING AS
H110E S
H110E S
3665173
BUSHING AS
H110E S
H110E S
3665174
BUSHING-LOWER
H110E S
H110E S
3665178
BUSHING-UPPER
H110E S
H110E S
3553746
BUSHING-VALVE
H110E S
H110E S
3665125
BUSHING AS
H110E S
H110E S
3630747
BUSHING-UPPER
H110E S
H110E S
3630744
BUSHING-LOWER
H110E S
H110E S
3630743
BUSHING AS
H110E S
H110E S
3553918
BUSHING-UPPER
H110E S
H110E S
3553911
BUSHING-LOWER
H110E S
H110E S
3553745
BUSHING-VALVE
H110E S
H110E S
3553746
BUSHING-VALVE
H110E S
H110E S
3665178
BUSHING-UPPER
H110E S
H110E S
3665174
BUSHING-LOWER
H110E S
H110E S
3665173
BUSHING AS
H110E S
H110E S
3665134
BUSHING-UPPER
H110E S
H110E S