BUSHING 3731525 - Caterpillar

Illustration 1 g00567411
Adjust the seat all the way forward by using lever (1) .
Pull handle (2) upward in order to unlock the operator's station. Rotate the operator's station to either side of the machine.
Release handle (2) in order to lock the operator's station in the desired position.
Illustration 2 g00567445
Four bolts hold the operator's platform in place. The bolts are located in each corner of the operator's platform. Loosen all four bolts and remove the nuts under the operator's platform.
Illustration 3 g00567451
Remove the lower bolts and nuts (3) from each of the two hinges.Note: Before you raise the platform, each side rail must be tilted to the outermost position in order to clear the ROPS.
Illustration 4 g00896862
Attach a 8S-9906 Ratchet Puller between eyelet (5) and eyelet (6) .
Lift the operator's platform until you can insert bolts (3) from step 5 into hole (4) .
Illustration 5 g00630326
Install bolts and nuts (3) in hole (4) on both hinges.Note: In order to lower the platform, reverse the procedure for raising the platform. Before you try to remove the bolts from hole (4) apply some tension on the ratchet puller.