BUSHING-GUIDE 4646938 - Caterpillar

Installation Procedure
Table 1
Tools Needed    
Tool     Part Number     Part Description     Qty    
A     1U-9200     Lever Puller Hoist     1    Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Attach Tooling (A) and a suitable lifting device to piston pump (9) . The weight of the piston pump is 45 kg (100 lb).
Illustration 1 g01333061
Install piston pump (9) . Install bolts (10) . Remove Tooling (A) .
Illustration 2 g01333056
Connect hose assemblies (8) .
Illustration 3 g01333049
Install bolt (7) . Connect five hose assemblies (6) .
Illustration 4 g01333039
Install bolts (5) . Connect harness assemblies (4) . Connect hose assemblies (3) .
Illustration 5 g01333037
Connect hose assemblies (2) .
Illustration 6 g01333034
Install block (1) .End By:
Install the floorplate. Refer to Disassembly and Assembly, "Floorplate - Remove and Install".
Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Implement)".