BUSHING 4B8137 - Caterpillar

Illustration 4 g03674502
View of left front flood light (F) Nut (4) 236-9775 Bracket As (LH) (7) 347-9427 Flood Lamp Gp (7a) 6V-9189 Locknut (7b) 8T-0389 Locknut (7c) 8T-4121 Hard Washer (7d) 8T-4195 Bolt (8) 8T-4133 Nut (10) 8T-4121 Hard Washer (11) 8T-4195 Bolt
Install flood lamp (7) on the left front corner of the cab.
Remove nut (F) that secures the lower flood light.
Install bracket (4) and secure with the following hardware: nut (8), two washers (10) and bolt (11) .
Install and tighten nut (F) that secures the lower flood light.
Install flood lamp (7) and secure with the following hardware: locknut (7b), hard washer (7c) and bolt (7d). Tighten locknut (7b) to 25 7 N m (18 5 lb ft).
Tighten locknut (7a) to a maximum of 20 N m (15 lb ft).
Illustration 5 g03674503
View of right front flood light (F) Nut (5) 236-9776 Bracket As (RH) (7) 347-9427 Flood Lamp Gp (7a) 6V-9189 Locknut (7b) 8T-0389 Locknut (7c) 8T-4121 Hard Washer (7d) 8T-4195 Bolt (8) 8T-4133 Nut (10) 8T-4121 Hard Washer (11) 8T-4195 Bolt
Install flood lamp (7) the right front corner of the cab.
Remove nut (F) that secures the lower flood light.
Install bracket (5) and secure with the following hardware: nut (8), two washers (10) and bolt (11) .
Install and tighten nut (F) that secures the lower flood light.
Install flood lamp (7) and secure with the following hardware: locknut (7b), hard washer (7c) and bolt (7d). Tighten locknut (7b) to 25 7 N m (18 5 lb ft).
Tighten locknut (7a) to a maximum of 20 N m (15 lb ft).
Illustration 6 g03674504
View of left rear flood light (6) 332-9402 Flood Lamp Gp (6a) 6V-9189 Locknut (6b) 8T-0389 Locknut (6c) 8T-4121 Hard Washer (6d) 8T-4195 Bolt
Install flood lamp (6) on the left rear corner of the cab.
Install flood lamp (6) and secure with the following hardware: locknut (6b), hard washer (6c) and bolt (6d). Tighten locknut (6b) to 25 7 N m (18 5 lb ft).
Tighten locknut (6a) to a maximum of 20 N m (15 lb ft).
Illustration 7 g03674506
View of right rear flood light (6) 332-9402 Flood Lamp Gp (6a) 6V-9189 Locknut (6b) 8T-0389 Locknut (6c) 8T-4121 Hard Washer (6d) 8T-4195 Bolt
Install flood lamp (6) on the right rear corner of the cab.
Install flood lamp (6) and secure with the following hardware: locknut (6b), hard washer (6c) and bolt (6d). Tighten locknut (6b) to 25 7 N m (18 5 lb ft).
Tighten locknut (6a) to a maximum of 20 N m (15 lb ft).
Illustration 8 g03674508
View of upper operator control panel (1) 251-4339 Rocker Switch
Remove plug from the upper operator control panel and install rocker switch (1) .
Illustration 9 g03674497
View of