4D6835 BUSHING Caterpillar parts
120, 120B, 12E, 140, 140B
Rating:
Alternative (cross code) number:
CA4D6835
4D-6835
4D6835
CA4D6835
4D-6835
4D6835
Weight: 0.96 pounds 0 kg.
Information:
ID
44.653
mm
OD
54.051
mm
WIDTH
67.08
mm
MOTOR GRADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$23.85
21 Jul 2023
Amazon.com
CTP 4D6835 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
$25.31
21 Sep 2022
Amazon.com
CTP 4D6835 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
$24.77
30 May 2022
Amazon.com
CTP 4D6835 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system to a level below the coolant temperature sensor. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining procedure.
Illustration 1 g02671576
Slide the locking tab into the unlocked position. Disconnect harness assembly (1) from coolant temperature sensor (2).
Remove coolant temperature sensor (2) from the water temperature regulator housing.
Remove sealing washer (3) from coolant temperature sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02671797
Install a new sealing washer (3) onto coolant temperature sensor (2).
Install coolant temperature sensor (2) to the water temperature regulator housing. Tighten the coolant temperature sensor to a torque of 25 N m (221 lb in).
Connect harness assembly (1) to coolant temperature sensor (2). Slide the locking tab into the locked position.
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" and refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct filling procedures.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system to a level below the coolant temperature sensor. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining procedure.
Illustration 1 g02671576
Slide the locking tab into the unlocked position. Disconnect harness assembly (1) from coolant temperature sensor (2).
Remove coolant temperature sensor (2) from the water temperature regulator housing.
Remove sealing washer (3) from coolant temperature sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02671797
Install a new sealing washer (3) onto coolant temperature sensor (2).
Install coolant temperature sensor (2) to the water temperature regulator housing. Tighten the coolant temperature sensor to a torque of 25 N m (221 lb in).
Connect harness assembly (1) to coolant temperature sensor (2). Slide the locking tab into the locked position.
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" and refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct filling procedures.
Caterpillar parts catalog:
Parts bushing Caterpillar catalog:
120B, 12E, 140, 140B
140
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E
120, 120B, 12E
120B, 12E, 140, 140B
120B, 12E, 140, 140B
120B, 12E, 140B
12E
120, 120B, 12E
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
1F2692
BUSHING
120B, 12E, 140, 140B
120B, 12E, 140, 140B
7D1963
BUSHING
14E
14E
6D9735
BUSHING
12F, 14E, 16
12F, 14E, 16
5H6188
BUSHING
14E
14E
6D6339
BUSHING
12F, 12G, 140G, 14E, 14G, 16, 16G
12F, 12G, 140G, 14E, 14G, 16, 16G
120, 120B, 12E