BUSHING 4F1113 - Caterpillar

Table 1
Transmission Type Estimated Initial Fill Service Refill
CX31 Standard Sump 45 L (12 US gal) 25 L (6.5 US gal)
CX31 with Retarder 49 L (13 US gal) 27 L (7 US gal) Note: The estimated initial fill volumes will vary by each application. Fluid volume that is required for the initial fill can be estimated by the following method. Add the fluid volume of the cooler and associated hoses to the transmission service refill volumes.____________________Installation Angle and Vehicle Slope Capability
____________________The transmission was designed to operate in a horizontal plane that allows for proper hydraulic functionality of the lube circuit, control circuit, and pressure circuit. Refer to Tables 2 and 3 for slope capability.Engine Forward Applications (Operating Angles)
Table 2
Maximum Operation Angle (Degrees)
(Engine forward applications)
Condition Standard Sump Retarder Equipped
Uphill 31 31
Downhill 31 31 Engine Aft Applications (Operating Angles)
Uphill and downhill conditions for the engine aft applications are the opposite of operating conditions for the engine forward applications. Refer to Tables 3 and 4 for slope capability.
Table 3
Maximum Operation Angle (Degrees)
(Engine aft applications)
Condition Standard Sump Retarder Equipped
Uphill 31 31
Downhill 31 31 Transmission Side Slope (Operating Angles)
Table 4
Maximum Operation Angle (Degrees Roll)
Condition Standard Sump Retarder Equipped
Left/Right roll 16 16