BUSHING 5358211 - Caterpillar

If the machine moves during the test, reduce the engine speed immediately, and engage the parking brake.If the machine moved while testing the brakes, consult your Caterpillar dealer for brake inspection and repair. Damaged brakes must be repaired before returning the machine to operation.
Note: The machine can drive through the brakes in first gear.Make sure that the area around the machine is clear of personnel and clear of obstacles.Test the brakes on a dry, level surface.Fasten the seat belt before you test the brakes.
Illustration 1 g00480077
Start the engine.
Raise all attachments.
Depress the brake pedal.
Release the parking brake.
While the brake pedal is depressed, move the directional control to the SECOND SPEED FORWARD position.
Gradually increase the engine speed to full load speed. The machine should not move.
Move the directional control to the NEUTRAL position.
Reduce the engine speed to LOW IDLE. Engage the parking brake. Lower all attachments to the ground. Apply a slight down pressure. Stop the engine.
If the machine moved while testing the brakes, contact your Caterpillar dealer. Have the dealer inspect and, if necessary, repair the service brake before returning the machine to operation.