BUSHING- 5370608 - Caterpillar

the following procedure in order to flash program the Product Link. The Product Link is flashed in order to upgrade the software. Flash programming of the Product Link must also be done if the Product Link has been replaced. The Caterpillar Electronic Technician (ET) contains the program WinFlash. WinFlash is used in order to load software into the Product Link. The following procedure is used in order to FLASH software into the Product Link.Note: Two communications adapters are available to flash electronic control modules. The 7X-1700 Communications Adapter can be used, or the 171-4400 Communication Adapter II .
Procedure
Connect the Data Link Cable between the Communication Adapter and the Electronic Technician.
Connect the Data Link Cable between the Communication Adapter and the diagnostic connector of the machine.
Use WinFlash in order to load the software.