BUSHING 5625772 - Caterpillar

Engine:
C7 (S/N: C7S1-UP)
C9 (S/N: C9S1-UP; MFF1-UP)
C13 (S/N: LEE1-UP)
C15 (S/N: B5R1-UP; SDP1-UP)
Truck Engine News SEBD6822, March 2009, "Cleaning a Plugged Diesel Particulate Filter (DPF)". Disregard this article. See the article that follows.This publication has been written in order to inform the Caterpillar dealers of the proper method of cleaning a plugged Diesel Particulate Filter (DPF) that has exhaust back pressure that is too high for effectively performing a regeneration. This condition is caused by a failure of the regeneration system.The DPF should be cleaned when a regeneration cannot be performed due to a plugged DPF. The Caterpillar Diesel Particulate Filter Ash Cleaning Tool should be utilized in order to properly clean a plugged DPF. Clean the DPF and then perform a stationary regeneration.Note: DO NOT reset the ash model after the DPF has been cleaned in the Caterpillar Diesel Particulate Filter Ash Cleaning Tool. There is a high possibility that the ash is still in the trap.Note: This procedure is in conflict with directions that are stated on the Diesel Particulate Filter Ash Cleaning Tool. The directions on the machine say not to clean a DPF unless the Ash Service Regen has been performed. This procedure is an exception in order to prevent unnecessary replacement of the DPF. This procedure enables faster repair times.