5V4410 BUSHING Caterpillar parts
416C, 416D, 420D, 426C, 428C, 436C, 438C, 446D, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, 938G, 955L, IT14G, IT14G2, IT28G, IT38G
Rating:
Alternative (cross code) number:
CA5V4410
5V-4410
5V4410
CA5V4410
5V-4410
5V4410
Weight: 0.05 pounds 0 kg.
Information:
ID
19.164
mm
OD
22.314
mm
WIDTH
22
mm
BACKHOE LOADER, WHEEL LOADER,
Compatible equipment models: 5V4410:
Number on catalog scheme:
25
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02022992
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from camshaft position sensor (3).
Remove bolt (4). Carefully remove camshaft position sensor (3) from the cylinder block. Note: Do not use a lever or use the harness connection on the camshaft position sensor to remove the camshaft position sensor from the cylinder block.
Remove O-ring seal (5) from camshaft position sensor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02022992
Install a new O-ring seal (5) to camshaft position sensor (3). Note: Do not lubricate the O-ring seal.
Install camshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N m (124 lb in).
Connect harness assembly (1) to camshaft position sensor (3). Slide locking tab (2) into the locked position.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02022992
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from camshaft position sensor (3).
Remove bolt (4). Carefully remove camshaft position sensor (3) from the cylinder block. Note: Do not use a lever or use the harness connection on the camshaft position sensor to remove the camshaft position sensor from the cylinder block.
Remove O-ring seal (5) from camshaft position sensor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02022992
Install a new O-ring seal (5) to camshaft position sensor (3). Note: Do not lubricate the O-ring seal.
Install camshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N m (124 lb in).
Connect harness assembly (1) to camshaft position sensor (3). Slide locking tab (2) into the locked position.
Cat SIS web machinery list:
Parts bushing Caterpillar catalog:
910E, 914G, 918F, 924F, IT14G, IT14G2, IT18, IT18B, IT18F, IT24F, IT28, IT28B, IT28F, IT28G
950, IT12, IT12B, IT14B, IT14F, IT14G, IT14G2
938F, 938G, 938G II, IT38F, IT38G, IT38G II
2470C, 2570C, 2670C, 2864C, 533, 543, 553C, 563C, 573C, 586C, 814F, 814F II, 815F, 815F II, 816F, 816F II, 938F, 938G, 938G II, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966...
533, 543, 545, 910K, 914K, 930K, 936, 936F, 938F, 938G, 938G II, 938H, 950B, 950F, 950F II, 960F, G936, HA770, HA771, HA870, HA871, HYDRAULIC, IT38F, IT38G, IT38G II, IT38H, TK370, TK371, TK380, TK381
928G, 928HZ, 936, 936F, 938F, 938G, 938G II, 938H, 962G, G936, IT28G, IT38F, IT38G, IT38G II, IT38H, IT62G, IT62G II, IT62H
824H, 826G, 826G II, 826H, 910E, 914G, 916, 928G, 928HZ, IT14G2, IT18, IT18B, IT28G
227, 928G, 928HZ, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, IT28G
924G, 924GZ, 924H, 924HZ, 926, 926A, 928F, 928HZ, 930G, 938K
928HZ, 930G, 950K, 962K, 988
928HZ, 930G, 950G II, 950H, 962G II, 962H, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972K, 972M, 972M XE, 986H
928HZ, 930G, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, R1300, R1300G, R1300G II
416C, 426C, 428C, 436C, 438C, 611, 613C, 613C II, 613G, 615, 615C, 621, 621B, 621E, 621R, 623B, 623E, 627B, 627E, 633D, 637D, 637E, 639D, 824, 988, D6D, D9G
1295256
BUSHING
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446D, 450E, 45...
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446D, 450E, 45...
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446D, 450E, 45...
416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D
416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D
6D4162
BUSHING-TERMINAL
416C, 426C, 428C, 436C, 438C, 446B, 769C, 776C, 777, 785, 793C, 815B, 916, 918F, 924F, 926, 936, 936F, 943, 950B, 953, 963, 966D, 966F, 980C, 980F, 988B, 988F II, D250B, D25C, D300B, D30C, D350C, D35C...
416C, 426C, 428C, 436C, 438C, 446B, 769C, 776C, 777, 785, 793C, 815B, 916, 918F, 924F, 926, 936, 936F, 943, 950B, 953, 963, 966D, 966F, 980C, 980F, 988B, 988F II, D250B, D25C, D300B, D30C, D350C, D35C...
1W8973
BUSHING
426C, 436C, 438C
426C, 436C, 438C
426B, 426C, 436B, 436C, 438B, 438C, 438D, 442D
416C, 420D, 420E, 426, 426C, 428, 428C, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E
416C, 420D, 420E, 426C, 428C, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E
0046557
BUSHING-REDUCER
3408, 3412, 3606, 3608, 3612, 3616, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 518, 518C, FB518, G3606, G3608, G3612, G3616
3408, 3412, 3606, 3608, 3612, 3616, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 518, 518C, FB518, G3606, G3608, G3612, G3616
2A2609
BUSHING
416C, 426C, 428C, 436C, 438C, 621, 623, 631C, 641, 650B, 651, 657, 657B, 666
416C, 426C, 428C, 436C, 438C, 621, 623, 631C, 641, 650B, 651, 657, 657B, 666