BUSHING-TRACK 6I6446 - Caterpillar

6I6446 BUSHING-TRACK Caterpillar parts 311, 311B, 312, 312B, 313B, E110, E110B, E120B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6I6446
6I-6446
6I6446

Weight: 2 pounds 0 kg.

Buy BUSHING-TRACK 6I6446 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 6I6446:

EXCAVATOR 311 311B 312 312B 313B E110 E110B E120B Caterpillar

Number on catalog scheme: 11

Caterpillar 6I6446 Parts scheme BUSHING-TRACK

For full view, you need register

Information:

Illustration 2 g01120250
Typical left side view
(1) Engine
(2) Flanges
(3) Bracket
Visually inspect the sensor assembly without removing the sensor assembly from the engine. Flanges (2) must be flush against engine (1) in order to ensure proper operation. Inspect bracket (3). Verify that the bracket allows the flanges to be flush against the engine.Verify that the bracket is not bent. If the bracket is bent or if an obstruction is preventing the sensor assembly from being installed correctly, the engine will not start.Note: The bracket cannot be replaced separately.
Remove the sensor assembly from the engine.
Illustration 3 g01223456
Sensor assembly
(4) O-ring
Ensure that one O-ring (4) is installed on each sensor. Check the O-rings for damage. Replace the O-rings, if necessary. Results:
OK - The sensor assembly's components are OK.Repair: Perform the following procedure in order to properly install the sensor assembly:
Lubricate each O-ring with engine oil.
Fully seat the sensor assembly in the engine. Note: If the sensor assembly will not fully seat into the engine, replace the sensor assembly.
Tighten the bracket bolt.
Connect the sensor's electrical connectors. Verify that the connectors are latched on both sides.
Ensure that the harness is properly secured, and that the tie-wraps are placed in the correct location. Proceed to Test Step 3.
Not OK - At least one of the sensor assembly's components is not OK.Repair: Obtain a new sensor assembly. Perform the following procedure in order to properly install the sensor assembly:
Lubricate each O-ring with engine oil.
Fully seat the sensor assembly in the engine. Note: If the sensor assembly will not fully seat into the engine, replace the sensor assembly.
Tighten the bracket bolt.
Connect the sensor's electrical connectors. Verify that the connectors are latched on both sides.
Ensure that the harness is properly secured, and that the tie-wraps are placed in the correct location. Verify that the problem is resolved.STOPTest Step 3. Inspect the Electrical Connectors and the Wiring
Illustration 4 g01235550
Typical left side view
(5) P400 connector for engine timing calibration
(6) J2/P2 ECM connector
(7) J401/P401 connectors for the primary engine speed/timing sensor
(8) J402/P402 connectors for the secondary engine speed/timing sensor
Thoroughly inspect connectors (5), (6), (7), and (8). Refer to the diagnostic functional test Troubleshooting, "Electrical Connectors - Inspect".
Illustration 5 g01144149
P2 terminations for the engine speed/timing sensors
(P2-25) Primary engine speed/timing −
(P2-35) Primary engine speed/timing +
(P2-46) Secondary engine speed/timing +
(P2-47) Secondary engine speed/timing −
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the engine speed/timing sensors.
Check the torque of the allen head screws for the ECM connectors. Refer to the diagnostic functional test Troubleshooting, "Electrical Connectors - Inspect" for the correct torque values.
Check the harness and the wiring for abrasion and for pinch points from each sensor back to the ECM. Expected Result:All of the connectors, pins and sockets are completely coupled and/or inserted and the harness and wiring are free of corrosion, of abrasion and of pinch points.Results:
OK - The harness and connectors appear to be OK. Proceed to Test Step 4.
Not OK - The connectors and/or wiring are not OK.Repair: Repair the wiring and/or the connectors. Replace parts, if

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

312 Excavator Custom Attachments 6BL00001-UP (MACHINE)

4I-7480: LINK AS-TRACK » SEBC10530019

312 Excavator 6BL00001-UP (MACHINE) POWERED BY 3054 Engine

4I-7480: LINK AS-TRACK » SEBP22540182

313B CR EXCAVATOR BAS00001-UP (MACHINE)

4I-7480: LINK AS-TRACK » SEBP28690109

Parts bushing Caterpillar catalog:

1171371 BUSHING-TRACK
312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 320, 320B, 320C, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325D, 329D L, OEMS

0996144 BUSHING-TERMINAL
2384C, 2484C, 303, 303.5C, 303.5D, 303.5E, 303C CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, ...

0990718 BUSHING
311, 311B, 312, 312B, 312B L, 313B, 320B, 320C, 320N, 322B, 322B L, 322C, 322C FM, 325, 325B L, 325C, 330B L, E110B, E120B, E200B, E240C, EL240B

0990721 BUSHING
311, 311B, 312, 312B, 313B, 320B, 320C, 320N, 322B, 322B L, 322C, 322C FM, 325, 325B L, 325C, 330B L, E110B, E120B, E200B, E240C, EL240B, HYDRAULIC

1373059 BUSHING
311B, 312, 312B, 312C L, 313B, M315, S305, S365B

1195392 BUSHING
303, 303.5C, 303C CR, 304, 304C CR, 305, 305.5, 305.5E, 305C CR, 306, 306E, 307, 307B, 307C, 307D, 308C, 308D, 311B, 311C, 311D LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 313B, 314C, 314D LCR, 315...

5I8009 BUSHING
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 32...

5I7528 BUSHING
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 32...

5I7529 BUSHING
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 32...

1373060 BUSHING
311B, 312, 312B, 313B, 320B, 320C, 322C, 325B L, 325C, 330B L

5I7542 BUSHING
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN

5I7539 BUSHING
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN

0931887 BUSHING
311, 311B, 312, 312B, 312B L, 313B, E110, E110B, E120, E120B

1026516 BUSHING
311, 311B, 312, 315, 317, OEMS

0961622 BUSHING-TERMINAL
307, 307B, 311, 311B, 312, 312B, 312B L, 315, 315B L, 317, 318B, 320B, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330B L, 345B L, 350, 375, 375 L, 5080, 5130, 5130B, 5230,...

1178880 BUSHING-TRACK
307, PM-465

1178881 BUSHING-TRACK
307, 307B, PM-465

5W5392 BUSHING
206, 206B, 212, 212B

1139391 BUSHING-REDUCER
312, 312B L, 312C, 315, 317

0931781 BUSHING
311, 312, E140, E180, E240, E240C, E300, E450, EL240B

0997148 BUSHING
311, 311B, 312, 312B, 315, 315B, 315B FM L, 317, E110B, OEMS

1171371 BUSHING-TRACK
312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 320, 320B, 320C, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325D, 329D L, OEMS

1171372 BUSHING-TRACK
312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 320, 320 L, 320B, 320B L, 320C, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 325D, 329D L, OEMS