BUSHING-TENSION 6R4352 - Caterpillar

Illustration 2 g03724942
443-1911 Front Lines Gp Installation Procedure
Illustration 3 g03724943
Valve group (A) (9) 340-3327 Control Valve Gp (11) 442-9494 Support As (12) 148-8325 Connector As (13) 148-8336 Connector As (14) 148-8378 Elbow As (17) 164-5567 Quick Disconnect Coupler As (19) 165-6365 Fitting As (20) 241-6215 Elbow As (26) 6V-0852 Dust Cap (29) 8T-4121 Hard Washer (30) 8T-4136 Bolt (31) 8T-4224 Hard Washer (33) 8T-6870 Bolt
Assemble valve group (A) .
Illustration 4 g03724944
Valve group (A)
Install valve group (A) in the pump compartment.
Illustration 5 g03725140
(5) 123-4750 Check Valve As (6) 239-1995 Tee (8) 285-2906 Hose As (10) 373-6444 Hose As (15) 148-8415 Reducer As (16) 164-5546 Tee As (17) 164-5567 Quick Disconnect Coupler As (18) 164-6874 Elbow Fitting (22) 3K-0360 O-Ring Seal (26) 6V-0852 Dust Cap (27) 6V-8398 O-Ring Seal (28) 6V-9746 O-Ring Seal
Attach hose (8) to port "M2" of the main pump.
Attach hose (10) to the hydraulic tank.
Illustration 6 g03724945
(1) 4I-9521 Marker Band (Red) (2) 4I-9522 Marker Band (Yellow) (3) 5I-7456 Hose As (4) 7K-1181 Cable Strap (7) 282-7106 Grommet (8) 285-2906 Hose As (10) 373-6444 Hose As (21) 292-7635 Boss (23) 5P-7470 Clip (24) 5P-7471 Clip (25) 5P-8182 Grommet (29) 8T-4121 Hard Washer (32) 8T-6466 Bolt
Connect hoses (3), (8), and (10) to valve group (A) .
Secure hoses (3) and (10) with the fittings as shown above.
Install grommet (7) as shown above.
Secure all hoses with cable straps (4) .
Illustration 7 g03724946
(1) 4I-9521 Marker Band (Red) (2) 4I-9522 Marker Band (Yellow) (3) 5I-7456 Hose As (4) 7K-1181 Cable Strap
Route hoses (3) to the boom.