7B0207 BUSHING Caterpillar parts
561B, 561C, 977H, D5, D9E
Rating:
Alternative (cross code) number:
CA7B0207
7B-0207
7B0207
CA7B0207
7B-0207
7B0207
Weight: 0.25 pounds 0 kg.
Information:
ID
31.864
mm
OD
38.151
mm
WIDTH
44.45
mm
PIPELAYER, TRACK-TYPE TRACTOR,
Compatible equipment models: 7B0207:
Number on catalog scheme:
12
For full view, you need register
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Service parts incorrectly substituted the 124-1854 Bolt for the 7N-1961 Bolt. The 7N-1961 Bolt uses a higher strength material, and can be substituted for the 124-1854 Bolt, but the 124-1854 Bolt is NOT a suitable substitute for the 7N-1961 Bolt.Solution
Illustration 1 g06126025
7N-1961 Bolt
Illustration 2 g06126020
124-1854 Bolt
A freeze has been issued on the 124-1854 Bolt to prevent issuing this bolt to 3500 engine applications. The 7N-1961 Bolt and the 124-1854 Bolt have the same dimensions. The 7N-1961 Bolts can be identified by an F-C marked on the head, refer to Illustration 1. The 124-1854 Bolts will not have the F-C marking on the head, refer to Illustration 2.If a 124-1854 Bolt has been installed in a G3500 or 3500 Series engine, contact the Dealer Solution Network (DSN) for additional information specific to the application.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Service parts incorrectly substituted the 124-1854 Bolt for the 7N-1961 Bolt. The 7N-1961 Bolt uses a higher strength material, and can be substituted for the 124-1854 Bolt, but the 124-1854 Bolt is NOT a suitable substitute for the 7N-1961 Bolt.Solution
Illustration 1 g06126025
7N-1961 Bolt
Illustration 2 g06126020
124-1854 Bolt
A freeze has been issued on the 124-1854 Bolt to prevent issuing this bolt to 3500 engine applications. The 7N-1961 Bolt and the 124-1854 Bolt have the same dimensions. The 7N-1961 Bolts can be identified by an F-C marked on the head, refer to Illustration 1. The 124-1854 Bolts will not have the F-C marking on the head, refer to Illustration 2.If a 124-1854 Bolt has been installed in a G3500 or 3500 Series engine, contact the Dealer Solution Network (DSN) for additional information specific to the application.
Cat SIS web machinery list:
Parts bushing Caterpillar catalog:
594, 594H, D9E, D9G, D9H
12F, 14E, 518, 528, 561C, 627, 637, 815, 920, 930, 941, 950, 951B, 955K, 955L, 966C, 977K, 980B, D4D, D5, D6C, D7F
12E, 140B, 14E, 561B, 955C, 977D, D4D, D8H, D8K, D9E
561B, 951B, 955C, 955H, 955K, 977D
594, D9E, D9G, D9H
322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 528, 657G, 824C, 826C, 834B, 834G, 834H, ...
120B, 12E, 140, 140B, 561B, 561C, 977H, D5
D9E, D9G, D9H
977D, 977H
1K6665
BUSHING
16, 572G, 583H, 583K, 594, 594H
16, 572G, 583H, 583K, 594, 594H
0K4680
BUSHING
571G
571G
1K4677
BUSHING
561C, 571G, 572G, 583H, 583K, 594, 594H
561C, 571G, 572G, 583H, 583K, 594, 594H
7K2019
BUSHING
941, D4D, D4E
941, D4D, D4E
594, D9E, D9G, D9H
977K, D7F, D7G
1S1607
BUSHING
594, 594H, 988
594, 594H, 988
594H, 814, 966C, 977K, 977L, 983, D9G
1H4561
BUSHING
D9E, D9G
D9E, D9G
2K1283
BUSHING
572G, 583H, 583K
572G, 583H, 583K
561B, 561C, 977H, D5