7P7334 BUSHING Caterpillar parts
963, 963B, 963C, 963D, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700G, R2900G, R3000H
Rating:
Alternative (cross code) number:
CA7P7334
7P-7334
7P7334
CA7P7334
7P-7334
7P7334
Weight: 0.20 pounds 0 kg.
Information:
ID
31.96
mm
OD
41.37
mm
WIDTH
28
mm
LOAD HAUL DUMP, TRACK LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 7P7334 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP 7P7334 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
Compatible equipment models: 7P7334:
Information:
The gearshift selector has a push-button switch that communicates over the data link. The selector has a dual character display with buttons for the following functions:
UP
DOWN
FORWARD
NEUTRAL
REVERSE
MODEThere is an optional lever shift selector. This lever shift selector has identical wiring, similar display, and function.Note: If you are experiencing trouble with the shifter, refer to Troubleshooting, KENR5099, "Transmission Does Not Respond to Shift Selector".The CX31 has six forward gears, neutral, and one reverse gear.
Illustration 1 g03872741
The transmission control has six buttons. (1) Mode (2) Upshift Arrow (3) Downshift Arrow (4) "D" button (5) "N" button (6) "R" buttonRefer to Operation and Maintenance Manual, "Transmission Control".
The machine must be stopped and the engine at low idle before changing direction. After moving the transmission control, do not accelerate until after hearing or feeling the transmission clutches engage.
When the transmission control is in the NEUTRAL position (5) , the neutral lock prevents the transmission control from being accidentally moved into a gear position.Press the neutral lock switch, and move the transmission control forward or backward in order to select the following gears."R" - The "R" indicates the reverse gear. Pressing this button causes the transmission to shift into the reverse gear."N" - The "N" indicates the transmission neutral position. Pressing this button causes the transmission to shift to neutral."D" - The "D" button indicates the forward gears. Pressing this button will cause the transmission to shift into the first gear in the forward direction."Mode" - Mode Selector"Arrow" - Upshift"Arrow" - DownshiftStop the vehicle and ensure that the engine is at low idle. When you move the transmission control from the NEUTRAL position to the FORWARD position, the first gear and the torque converter drive will be engaged.As you increase engine speed and the ground speed increases, the transmission will upshift. As the ground speed continues to increase, the transmission will upshift automatically until the selected gear is reached.If the ground speed is reduced or the engine speed is reduced by an increased load, the transmission will automatically downshift in order to select the correct gear. The transmission downshifts one gear at a time in order to select the correct gear.A downshift inhibitor prevents the operator from forcing a downshift. When the vehicle is in motion and the gearshift selector is moved to a lower gear, the transmission will not force a sudden downshift. The transmission will not downshift until the proper ground speed is achieved.Checking the Oil Level The gearshift selector can be used in order to initiate the oil level check. The check is initiated by pressing the up arrow and the down arrow on the keypad simultaneously. The status of the oil level is displayed on the digital display.Basic Operation
Illustration 2 g01343907
Display showing the NEUTRAL position.
UP
DOWN
FORWARD
NEUTRAL
REVERSE
MODEThere is an optional lever shift selector. This lever shift selector has identical wiring, similar display, and function.Note: If you are experiencing trouble with the shifter, refer to Troubleshooting, KENR5099, "Transmission Does Not Respond to Shift Selector".The CX31 has six forward gears, neutral, and one reverse gear.
Illustration 1 g03872741
The transmission control has six buttons. (1) Mode (2) Upshift Arrow (3) Downshift Arrow (4) "D" button (5) "N" button (6) "R" buttonRefer to Operation and Maintenance Manual, "Transmission Control".
The machine must be stopped and the engine at low idle before changing direction. After moving the transmission control, do not accelerate until after hearing or feeling the transmission clutches engage.
When the transmission control is in the NEUTRAL position (5) , the neutral lock prevents the transmission control from being accidentally moved into a gear position.Press the neutral lock switch, and move the transmission control forward or backward in order to select the following gears."R" - The "R" indicates the reverse gear. Pressing this button causes the transmission to shift into the reverse gear."N" - The "N" indicates the transmission neutral position. Pressing this button causes the transmission to shift to neutral."D" - The "D" button indicates the forward gears. Pressing this button will cause the transmission to shift into the first gear in the forward direction."Mode" - Mode Selector"Arrow" - Upshift"Arrow" - DownshiftStop the vehicle and ensure that the engine is at low idle. When you move the transmission control from the NEUTRAL position to the FORWARD position, the first gear and the torque converter drive will be engaged.As you increase engine speed and the ground speed increases, the transmission will upshift. As the ground speed continues to increase, the transmission will upshift automatically until the selected gear is reached.If the ground speed is reduced or the engine speed is reduced by an increased load, the transmission will automatically downshift in order to select the correct gear. The transmission downshifts one gear at a time in order to select the correct gear.A downshift inhibitor prevents the operator from forcing a downshift. When the vehicle is in motion and the gearshift selector is moved to a lower gear, the transmission will not force a sudden downshift. The transmission will not downshift until the proper ground speed is achieved.Checking the Oil Level The gearshift selector can be used in order to initiate the oil level check. The check is initiated by pressing the up arrow and the down arrow on the keypad simultaneously. The status of the oil level is displayed on the digital display.Basic Operation
Illustration 2 g01343907
Display showing the NEUTRAL position.
Cat SIS web machinery list:
Parts bushing Caterpillar catalog:
2V5715
BUSHING-TERMINAL
518, 528, 528B, 530B, 611, 613C, 613C II, 613G, 615, 615C, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 814B, 815B, 816B, 950B, 950B/950E, 966D, 966F, D25C, D25D, D300E, D300E II, D30C, D350C, D350E, D...
518, 528, 528B, 530B, 611, 613C, 613C II, 613G, 615, 615C, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 814B, 815B, 816B, 950B, 950B/950E, 966D, 966F, D25C, D25D, D300E, D300E II, D30C, D350C, D350E, D...
2131370
BUSHING
2470C, 2570C, 2670C, 2864C, 533, 543, 553C, 563C, 573C, 586C, 814F, 814F II, 815F, 815F II, 816F, 816F II, 938F, 938G, 938G II, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966...
2470C, 2570C, 2670C, 2864C, 533, 543, 553C, 563C, 573C, 586C, 814F, 814F II, 815F, 815F II, 816F, 816F II, 938F, 938G, 938G II, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966...
9G7683
BUSHING
936, 936F, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 966C, 966H, 966K, 966M, 966R, G936, IT62G, IT62G II, IT62H, R1300, R1300G, R1300G II
936, 936F, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 966C, 966H, 966K, 966M, 966R, G936, IT62G, IT62G II, IT62H, R1300, R1300G, R1300G II
1V8242
BUSHING
928HZ, 930G, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, R1300, R1300G, R1300G II
928HZ, 930G, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, R1300, R1300G, R1300G II
8K0079
BUSHING-TERMINAL
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 826G, 826G II, 826H, 834B, 836, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, 988B, 988F, 988F II, AD30, AD45, AD45B, AE40 II, R1700G, R2900, R...
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 826G, 826G II, 826H, 834B, 836, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, 988B, 988F, 988F II, AD30, AD45, AD45B, AE40 II, R1700G, R2900, R...
6M1592
BUSHING
824, 824B, 825B, 825C, 826B, 826C, 834, 834B, 836, 986H, 988, 988B, 988F, 988F II, 992, R1300, R1300G, R1300G II, R2900, R2900G, R3000H
824, 824B, 825B, 825C, 826B, 826C, 834, 834B, 836, 986H, 988, 988B, 988F, 988F II, 992, R1300, R1300G, R1300G II, R2900, R2900G, R3000H
4V1901
BUSHING
525D, 535D, 545D, 555D, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE,...
525D, 535D, 545D, 555D, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE,...
9J7100
BUSHING
950K, 962K, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972M, 972M XE, R1300, R1300G, R1300G II
950K, 962K, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972M, 972M XE, R1300, R1300G, R1300G II
1414055
BUSHING
966G, 966G II, 966H, 972G, 972G II, 972H, R1600
966G, 966G II, 966H, 972G, 972G II, 972H, R1600
2482507
BUSHING
992K, R3000H
992K, R3000H
2G8635
BUSHING
16G, 16H, 16H NA, 16M, 515, 525, 525B, 525D, 535D, 545D, 555D, R1300, R1300G, R1300G II
16G, 16H, 16H NA, 16M, 515, 525, 525B, 525D, 535D, 545D, 555D, R1300, R1300G, R1300G II
1981142
BUSHING
R1300, R1300G, R1300G II, R1600
R1300, R1300G, R1300G II, R1600
3W8398
BUSHING
963, 963B, 963C, 963D
963, 963B, 963C, 963D
8G0816
BUSHING-TERMINAL
953B, 953C, 963B, 973
953B, 953C, 963B, 973
3G4600
BUSHING-TERMINAL
943, 953, 963, 963B, 973
943, 953, 963, 963B, 973
3G5003
BUSHING
621K, 623K, 623K LRC, 627K, 627K LRC, 797, 797B, 797F, 834G, 834H, 943, 953, 963, 963B, 973, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992G, 992K, 993K, 994, 994D, 994F, 994H
621K, 623K, 623K LRC, 627K, 627K LRC, 797, 797B, 797F, 834G, 834H, 943, 953, 963, 963B, 973, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992G, 992K, 993K, 994, 994D, 994F, 994H
2H2521
BUSHING-TERMINAL
955C, D4D, D4E, D4E SR
955C, D4D, D4E, D4E SR
4J4232
BUSHING
4A, 4S, 637, 657B, D4D, D4E, D4E SR
4A, 4S, 637, 657B, D4D, D4E, D4E SR
7P6446
BUSHING-TERMINAL
943, 953, 953B, 963, 963B, 973
943, 953, 953B, 963, 963B, 973
7P6939
BUSHING-TERMINAL
943, 953, 953B, 963, 963B, 973
943, 953, 953B, 963, 963B, 973
7J9705
BUSHING
963, 963B, 963C, 963D, 988
963, 963B, 963C, 963D, 988
7P6893
BUSHING
963, 963B, 963C, 963D
963, 963B, 963C, 963D
7J9688
BUSHING
814S, 941, 943, 950, 953, 953C, 953D, 955K, 955L, 963, 963B, 963C, 963D
814S, 941, 943, 950, 953, 953C, 953D, 955K, 955L, 963, 963B, 963C, 963D
7P7335
BUSHING
963, 963B, 963C, 963D
963, 963B, 963C, 963D