BUSHING ASSEM. 8S5802 - Caterpillar

Illustration 1 g03375459
Typical example
Table 1
Specification for 362-8449 Torque Converter Housing Gp and 418-7982 Torque Converter Housing Gp    
Item     Qty     part     Specification Description    
1     3     8T-4194 Bolt     Torque to 100 20 N m (74 15 lb ft).    
2     10     8T-4184 Bolt     Torque to
100 20 N m (74 15 lb ft).    
3     7     6V-5684 Bolt     Torque to
100 20 N m (74 15 lb ft).    
4     8     172-9966 Bolt     Torque to
100 20 N m (74 15 lb ft).    
5     1     4H-6112 Breather     Torque to
35 3 N m (26 2 lb ft).    
6     1     363-2112 Lip Type Seal     Install the sealing lip of the lip type seal dry.
Lubricate the outer diameter when pressing into the housing.
(1)    
7     1     274-6111 Bearing Race     Apply green Loctite 609 to the bearing race.    
8     5     172-9966 Bolt     Use the following procedure in order to tighten the bolt:
1. Tighten the bolt to
60 5 N m (44 4 lb ft).
2. Again, turn the bolt to an additional angle of 30 3 degrees.    
9     1     6V-5843 Bolt     Torque to
55 10 N m (41 7 lb ft).    
10     2     5P-8347 Bolt     Torque to
28 7 N m (248 62 lb in).    
( 1 ) For the (S/N: HTC1-UP) machines and for the (S/N: D9F650-UP) machines, do not lubricate the seal. For both of these models, appropriate to lubricate the outer diameter when pressing into the housing.