9J1914 BUSHING Caterpillar parts
10, D10, D11N, D11R, D11T
Rating:
Alternative (cross code) number:
CA9J1914
9J-1914
9J1914
CA9J1914
9J-1914
9J1914
Weight: 6 pounds 2 kg.
Information:
ID
114.78
mm
OD
139.84
mm
WIDTH
66.5
mm
RIPPER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 9J1914 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP 9J1914 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
4
For full view, you need register
Information:
Illustration 1 g03082965
(1) 341-6784 Fuel Line
(2) 341-6785 Fuel Line
(3) 360-1596 Block
(4) 311-8193 Bolt
(5) 328-7116 Bracket As
(6) 327-7734 Fuel Rail Gp
(7) 6V-5815 Bolt
(8) 6V-5839 Washer
Table 1
Specification for 304-9602 Fuel Injection Lines Gp
Note: Perform the following procedure in order to install the high-pressure fuel lines.
Note: Lubricate the ends of the fuel lines with clean engine oil prior to installation.
1. Insert fuel line (2) into fuel rail (6) and block (3). Attach fuel line (2) to fuel rail (6) and block (3) using bolts (4) and washers (8).
2. Evenly hand tighten bolts (4) to fuel rail (6).
3. Evenly hand tighten block (3) to fuel pump adapter (not shown) using bolts (7) .
4. Evenly tighten bolts (4) to fuel rail (6) to 20 N m (15 lb ft). Do not rotate bolts (4) more than 90 degrees at one time.
5.Evenly tighten bolts (4) to block (3) to 20 N m (15 lb ft). Do not rotate bolts (4) more than 90 degrees at one time.
6. Evenly tighten bolts (7) to pump adapter to 20 N m (15 lb ft).
7. Evenly tighten bolts (4) to fuel rail (6) to 40 N m (30 lb ft). Do not rotate bolts (4) more than 45 degrees at one time.
8. Evenly tighten bolts (4) to block (3) to 40 N m (30 lb ft). Do not rotate bolts (4) more than 45 degrees at one time.
9. Evenly tighten bolts (7) to pump adapter to standard torque.
10. Install brackets (5) and all mounting hardware.
11. Insert fuel line (1) into the high-pressure fuel pump and block (3). Attach fuel line (1) to the high-pressure pump and block (3) using bolts (4) and washers (8).
12. Evenly hand tighten bolts (4) to the high-pressure fuel pump.
13. Evenly hand tighten bolts (4) to block (3).
14. Evenly tighten bolts (4) to high-pressure fuel pump to 20 N m (15 lb ft). Do not rotate bolts (4) more than 90 degrees at one time.
15. Evenly tighten bolts (4) to block (3) to 20 N m (15 lb ft). Do not rotate bolts (4) more than 90 degrees at one time.
16. Evenly tighten bolts (4) to the high-pressure fuel pump to 40 N m (30 lb ft). Do not rotate bolts (4) more than 45 degrees at one time.
17. Evenly tighten bolts (4) to block (3) to 40 N m (30 lb ft). Do not rotate bolts (4) more than 45 degrees at one time.
18. Install bracket (5) and all mounting hardware.
Caterpillar parts catalog:
Parts bushing Caterpillar catalog:
561M, 561N, 613G, 735, 735B, 740, 740B, 770G, 770G OEM, 797, 797B, 854G, 854K, 992G, 992K, 993K, D10R, D10T, D11N, D11R, D11T, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6N OEM, D6R, D6R STD, D9R
572R II, D10R, D11R, D7H, D7R, D7R II, D8N, D8R, D8R II
D11R, D11T, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
D10, D8L, D9N, D9R, D9T
10S, 854G, 854K, 9B, D10, D11N, D11R
824G II, 824H, 844, 844H, 854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
D11N, D11R, D11T
10, D10, D11N, D11R, D11T, D9L
D11R, D11T
D11N, D11R, D11T
D11N, D11R
D11N, D11R
1987343
BUSHING
D11N, D11R, D11T
D11N, D11R, D11T
9W2500
BUSHING
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
D11N, D11R
D11N, D11R
D9N, D9R
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
D10N, D10R, D10T
D10N, D9L
4T3845
BUSHING
D11N
D11N