BUSHING-TERMINAL 9J8076 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-1857     Retaining Ring Pliers     1    
B     1P-1855     Retaining Ring Pliers     1    
Illustration 1 g01125883
Install valve (19). Tighten valve (19) to a torque of 20 N m (15 lb ft).
Illustration 2 g01125881
Raise the temperature of bearing (18). Install bearing (18) onto shaft (16) .
Use Tooling (B) in order to install retaining ring (17) .
Illustration 3 g01125882
Install shaft (16) into cover (8) .
Use Tooling (A) in order to install retaining ring (15) .
Illustration 4 g01125844
Install springs (14) .
Illustration 5 g01125843
Install balls (13) .
Illustration 6 g01125842
Install ring (12), outer rotor (11), and ball (10) .
Illustration 7 g01125841
Install inner rotor (9) .
Illustration 8 g01125840
Turn the pump upside-down in order to install cover (8) .
Install bolts (7). Tighten bolts (7) to a torque of 10 N m (89 lb in).
Illustration 9 g01125839
Install seal (5) and filter (6) .
Illustration 10 g01125838
Install cover (4) and bolts (3). Tighten bolts (3) to a torque of 23 N m (17 lb ft).
Illustration 11 g01125837
Install O-ring seal (1) onto housing (2) .End By: Install the transmission pump. Refer to Disassembly and Assembly, "Transmision Pump - Install".