3742755 BYPASS GP-FILTER Caterpillar parts
R1600H
Rating:
Alternative (cross code) number:
CA3742755
374-2755
3742755
CA3742755
374-2755
3742755
Weight: 5 pounds 2 kg.
LOAD HAUL DUMP,
Compatible equipment models: 3742755:
Number on catalog scheme:
11
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01120972
Remove tube (1). Remove the O-ring seal and the integral seal from the tube. Remove bolts (3) from exhaust tube assembly. Remove bolts (4) from inlet tube assembly.
Remove bolts (7). Remove bolts (6).
Install Tooling (A) and a suitable lifting device on cylinder head (8). The weight of cylinder head (8) is approximately 47 kg (104 lb).
Remove cylinder head (8). Remove cylinder head gasket (9).
Remove gasket (5) from the inlet tube assembly. Remove gasket (2) from the exhaust tube assembly.
Illustration 2 g01121095
Remove seals (10). Remove seals (11). Remove O-ring seal (13).
Remove spacer plate (12). Remove gasket (14). Remove O-ring seal (15) from the dowel.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01120972
Remove tube (1). Remove the O-ring seal and the integral seal from the tube. Remove bolts (3) from exhaust tube assembly. Remove bolts (4) from inlet tube assembly.
Remove bolts (7). Remove bolts (6).
Install Tooling (A) and a suitable lifting device on cylinder head (8). The weight of cylinder head (8) is approximately 47 kg (104 lb).
Remove cylinder head (8). Remove cylinder head gasket (9).
Remove gasket (5) from the inlet tube assembly. Remove gasket (2) from the exhaust tube assembly.
Illustration 2 g01121095
Remove seals (10). Remove seals (11). Remove O-ring seal (13).
Remove spacer plate (12). Remove gasket (14). Remove O-ring seal (15) from the dowel.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts bypass Caterpillar catalog:
4374342
BYPASS GP-FILTER
980M, 982M
980M, 982M
3975173
BYPASS GP-EXHAUST
3512C, 3516C
3512C, 3516C
3904256
BYPASS GP-EXHAUST
3512C, 3516C
3512C, 3516C
3848624
BYPASS GP-EXHAUST
G3516B
G3516B