1061064 C-FRAME GP-POWER ANGLING Caterpillar parts
D4C III, D5C, D5C III
Rating:
Alternative (cross code) number:
CA1061064
106-1064
1061064
CA1061064
106-1064
1061064
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hydraulic Power Pump 106-1064-006 1061064006 Fits for Eaton Char-Lynn 2000 Series 106-1064 1061064
ZJSYPXB ⚙️ Part Name : Hydraulic Motor || ⚙️ Part Number : 106-1064-006 1061064006 106-1064 1061064 || ⚙️ Application : Fits for Eaton Char-Lynn 2000 Series || ⚙️ Accurate ⚙️ -Install and use our accessories. Please find the right product according to the old part number and machine model, if you are not sure, please contact us in time, we are more than happy to provide services. || ⚙️ Reliable performance ⚙️: -Carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
ZJSYPXB ⚙️ Part Name : Hydraulic Motor || ⚙️ Part Number : 106-1064-006 1061064006 106-1064 1061064 || ⚙️ Application : Fits for Eaton Char-Lynn 2000 Series || ⚙️ Accurate ⚙️ -Install and use our accessories. Please find the right product according to the old part number and machine model, if you are not sure, please contact us in time, we are more than happy to provide services. || ⚙️ Reliable performance ⚙️: -Carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
Number on catalog scheme:
For full view, you need register
Information:
TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1099 Lifting Eye Assembly 2 Start By:
Remove the fuel filter housing.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the oil from the engine oil filter housing into a suitable container. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01113749
Remove bolts (1) and adapter (2). Remove the O-ring seal from the adapter.
Illustration 2 g01113751
Remove bolts (4) and spacers (5) from tube assembly (3).
Remove bolts (6) and plate (7).
Illustration 3 g01113831
Install Tooling (A) and a suitable lifting device on engine oil filter housing (9). The weight of engine oil filter housing (9) is approximately 95 kg (210 lb).
Remove bolts (8). Remove engine oil filter housing (9).
Attach a suitable lifting device on oil filter housing support (11). The weight of oil filter housing support (11) is approximately 71 kg (157 lb).
Remove bolts (10). Remove oil filter housing support (11). Installation Procedure
Install engine oil filter housing (9) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1099 Lifting Eye Assembly 2 Start By:
Remove the fuel filter housing.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the oil from the engine oil filter housing into a suitable container. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01113749
Remove bolts (1) and adapter (2). Remove the O-ring seal from the adapter.
Illustration 2 g01113751
Remove bolts (4) and spacers (5) from tube assembly (3).
Remove bolts (6) and plate (7).
Illustration 3 g01113831
Install Tooling (A) and a suitable lifting device on engine oil filter housing (9). The weight of engine oil filter housing (9) is approximately 95 kg (210 lb).
Remove bolts (8). Remove engine oil filter housing (9).
Attach a suitable lifting device on oil filter housing support (11). The weight of oil filter housing support (11) is approximately 71 kg (157 lb).
Remove bolts (10). Remove oil filter housing support (11). Installation Procedure
Install engine oil filter housing (9) in the reverse order of removal.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D5C & D5C LGP TRACTORS / POWERSHIFT / 3MK00001-UP (MACHINE) POWERED BY 3204 ENGINE »
106-1064
C-FRAME GP-POWER ANGLING
D5C D5C LGP XL Series III Tractors Power Shift 6ZL00001-UP (MACHINE) POWERED BY 3046 Engine »
106-1064
C-FRAME GP-POWER ANGLING
D4C & D4C LGP, XL Series III Hystat Tractors 4LS00001-UP (MACHINE) POWERED BY 3046 Engine »
106-1064
C-FRAME GP-POWER ANGLING
Caterpillar parts catalog:
Parts c Caterpillar catalog:
1415600
C-FRAME AS
D5C III
D5C III
1397681
C-FRAME GP-POWER ANGLING
D4C III, D5C III
D4C III, D5C III
1075629
C-FRAME GP-POWER ANGLING
D5C III
D5C III
1068468
C-FRAME GP-POWER ANGLING
D5C, D5C III
D5C, D5C III
1397736
C-FRAME GP-POWER ANGLING
D5C III
D5C III
1401060
C-FRAME AS
D4C III, D5C III
D4C III, D5C III
D4C III, D5C, D5C III
1068466
C-FRAME AS
D5C, D5C III
D5C, D5C III
D5C III
1411590
C-FRAME AS
D5C III
D5C III
3341742
C-FRAME AS
D6T XL
D6T XL
9J9469
C-FRAME GP
5S, 6A, 6S, D6D, D6D SR, D6E, D6E SR, D6G, D6G SR, D6G2 XL
5S, 6A, 6S, D6D, D6D SR, D6E, D6E SR, D6G, D6G SR, D6G2 XL
9J4615
C-FRAME GP-CUSHION
10S, D10
10S, D10
6Y6135
C-FRAME GP-POWER ANGLING
527, D5H, D5HTSK II
527, D5H, D5HTSK II
6J0679
C-FRAME GP
5S, D5B
5S, D5B