C-FRAME GP-POWER ANGLING 1105226 - Caterpillar

1. Disconnect hose (2) from washer pump assembly (1). 2. Pull hose (2) through grommet (3) and two clips (4). 3. Remove cap assembly (5) from the washer reservoir.4. Remove the four bolts, two straps (6) and washer reservoir (7) from the machine.Install Window Washer Reservoir
1. Put window washer reservoir (5) in position, and install two straps (3) and the four bolts that hold it in place.2. Install cap assembly (1) on the washer reservoir.3. Put hose (2) through clip (4). 4. Put hose (2) in position through clip (7) and grommet (6). 5. Install hose (2) on washer pump assembly (8).END BY:a. install lower cab shrouds (install front left hand and front shroud only) **This operation is in Vehicle Systems Disassembly And Assembly section.