C-FRAME AS 8E9986 - Caterpillar

Solenoid Test
Table 6
Solenoid Test Solenoid 1 Solenoid 2 Solenoid 3 Solenoid 4 Solenoid 5
________ ohms ________ ohms ________ ohms ________ ohms ________ ohms Start Checks
Table 7
Lubrication Pressure Input Speed (500 30 rpm)
Input Flow 38 4 L/min (10 1 US gpm)
Supply Pressure 3000 70 kPa (435 10 psi) _______kPa
_______(psi) Clutch Leakage Check
Table 8
Clutch Leakage Check Input Speed (2200 30 rpm)
Input Flow 75 4 L/min (20 1 US gpm)
Supply Pressure 3100 205 kPa (450 30 psi)
Lubrication pressure MUST BE between 214 14 kPa (31 2 psi) to continue.
Gear Range 1F 2F 3F 1R 2R 3R N
Input Flow ______ ______ ______ ______ ______ ______ ______
Output Flow ______ ______ ______ ______ ______ ______ ______
Leakage ______ ______ ______ ______ ______ ______ ______
Average of Arrangement ______ ______ ______ ______ ______ ______ ______ Lube Circuit Check
Table 9
Lube Circuit Check Gear Range FORWARD 2
Input Speed (2200 30 rpm)
Lube Flow 76 4 L/min (20 1 US gpm)
Average lubrication Pressure Of Arrangement _______kPa
_______(psi) Lubrication Pressure _______kPa
_______(psi) Speed Sensor Test
Table 10
Sensor Minimum Voltage
D6N
Intermediate Speed Sensor 1 7 VRMS
Intermediate Speed Sensor 2 7 VRMS
Output Speed Sensor 1 3 VRMS
Output Speed Sensor 2 3 VRMS
Table 11
Speed Sensor Test Input Speed (800 5 rpm)
Input Flow 38 4 L/min (10 1 US gpm)
Supply Pressure 3000 70 kPa (435 10 psi)
Sensor Gear Range
FORWARD 1 FORWARD 2
Intermediate Speed Sensor 1 __________________ VRMS __________________ VRMS
Intermediate Speed Sensor 2 __________________ VRMS __________________ VRMS
Output Speed Sensor 1 __________________ VRMS __________________ VRMS
Output Speed Sensor 2 __________________ VRMS __________________ VRMS ISO Particle Count
Table 12
ISO Particle Count Sample the test bench oil supply.
*ISO 4406 is 16/13 or better ________/________Particle Count
Table 13
______________________________________
Technician
______________________________________
Supervisor