CAB G 0533744 - Caterpillar

Illustration 2 g03489216
Install identification plate (44) and screw (43).
Illustration 3 g03489177
Install O-ring seal (42) and plug (41). Install O-ring seal (40) and plug (39).
Illustration 4 g03489078
Install coil (37) and cap (36) onto cartridge assembly (38). Tighten cap (36) to a torque of 4.0 0.5 N m (35.40 4.43 lb in).
Illustration 5 g03488602
Install backup rings (35) and backup rings (34). Install O-ring seals (33), (32), and (31).
Illustration 6 g03488600
Install solenoid valve (30). Tighten solenoid valve (30) to a torque of 28 3 N m (21 2 lb ft).
Illustration 7 g03488596
Install coil (28) and cap (27) onto cartridge assembly (29). Tighten cap (27) to a torque of 4.0 0.5 N m (35.40 4.43 lb in).
Illustration 8 g03488576
Install backup rings (25) and backup rings (26). Install O-ring seals (24), (23), and (22).
Illustration 9 g03488557
Install solenoid valve (21). Tighten solenoid valve (21) to a torque of 28 3 N m (21 2 lb ft).
Illustration 10 g03488523
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (20), spring (19), O-ring seal (18), and shutoff plug (17).
Illustration 11 g03488517
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (16), washer (15), stem valve (14), washer (13), spring (12), O-ring seal (11), and plug (10).
Illustration 12 g03488496
Install stem valve (9), O-ring seal (8), backup ring (7), and retainer (6).
Illustration 13 g03488266
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retainer (5), spring (4), O-ring seal (3), spring housing (2), and bolts (1). End By:
Install the ride control diverter valve.