CAB ASSY. 0992874 - Caterpillar

Table 1
Parts that are Required in Order to Install Improved Door Pull Handles    
Item     Qty     Part Number     Description    
4     2     6EL3092     Tapping Block    
5     2     6EL1900     Tapping Block    
7     2     126-2373     Pull Handle Assembly    
8     4     2H-3764     Bolt    
Personal injury can result from flame cutting or welding on painted areas.The effect of gasses from burned paint is a hazard to the person doing the cutting or welding.Do not flame cut or weld on painted areas.
Personal injury or death can result from fumes, gases and ultraviolet rays from the weld arc.Welding can cause fumes, burn skin and produce ultraviolet rays.Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing area. Wear eye, ear and body protection before working.Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can cause death.Read and understand the manufacturer's instructions and your employer's safety practices. Do not touch live electrical parts.See "American National Standard Z49.1, Safety in Welding and Cutting" published by the American Welding Society.American Welding Society
2501 N.W. 7th Street
Miami, Florida 33125
See "OSHA Safety and Health Standards, 29 CFR 1910", available from U.S. Department of Labor.U.S. Department of Labor
Washington, D.C. 20210
Protect dash, exposed lining and other components from heat and sparks generated by grinding and welding.
Procedure:
Illustration 1 g00906071
View of the door pull handle to be removed (1) 8D-7252 Door Pull Handle (2) 6EL1242 Panel
Remove 6EL1242 Panel .
Remove 8D-7252 Door Pull Handle .
Illustration 2 g00906072
Remove tapping blocks (3) .
Illustration 3 g00906073
View of the door modifications (4) 6EL3092 Tapping Block (5) 6EL1900 Tapping Block (A) 22 mm (0.86 inch) (B) 30 mm (1.18 inch) (C) 631 mm (24.84 inch) (D) 801.3 mm (31.54 inch) (E) 878 mm (34.56 inch) (F) 554.3 mm (21.82 inch) (G) 384 mm (15.11 inch)
Modify the door assembly. Refer to Illustration 3.
Illustration 4 g00906454
View of 6EL1242 Panel modification (2) 6EL1242 Panel (6) Drill two holes 8 mm (0.31 inch) diameter (H) 508.3 mm (20.01 inch) (J) 338 mm (13.30 inch) (K) 519.5 mm (20.45 inch)
Modify 6EL1242 Panel (2). Refer to Illustration 4.
Illustration 5 g00906455
View of the 126-2373 Pull Handle Assembly installation (7) 126-2373 Pull Handle Assembly (8) 2H-3764 Bolt
Install the 6EL1242 Panel that was removed in Step 1.
Install a 126-2373 Pull Handle Assembly (7) in the two positions using four 2H-3764 Bolts (8) .