CAB AS-ENCLOSED ROPS 3323310 - Caterpillar

Illustration 1 g00793366
(1) Torque for two jam nuts ... 8 3 N m (70 25 lb in) (2) Torque for four nuts ... 38 7 N m (28 5 lb ft)
Illustration 2 g00793403
(3) Torque for nut ... 136 14 N m (100 10 lb ft) (4) Torque for three bolts ... 136 14 N m (100 10 lb ft) (5) Torque for two nuts ... 136 14 N m (100 10 lb ft)
Illustration 3 g00793444
(6) Torque for jam nut on each pedal ... 8 3 N m (70 25 lb in) (7) Torque for two nuts on each pedal ... 38 7 N m (28 5 lb ft)
Illustration 4 g00793473
(8) 5V-8494 Spring Length under test force ... 189 mm (7.4 inch) Test force ... 127 10 N (28.6 2.2 lb) Free length after test ... 165 1 mm (6.50 .04 inch) Outside diameter ... 19.6 mm (.77 inch)Prior to assembly of sensor (11) , rotate lever (13) so that surface (I) of lever (13) is parallel with surface (H) of plate (10) . The proper position of lever (13) is shown as a dashed line. Install sensor (11) and rotate lever (13) until the lever contacts bumper (12) . The correct position of the lever is shown as a solid line.Adjust angle assembly (9) against lever (13) in order to hold the pedal 83 mm (3.3 inch) from the stop on the floorplate. The 83 mm (3.3 inch) is shown as dimension (G) in Illustration 3.
Illustration 5 g00793504
Adjust the position of plate (15) in order to activate switch (14) after the pedal has been depressed 4.5 1.5 mm (.18 .06 inch).
Illustration 6 g00793583
(16) Lubricate the sealing lip with a minimal amount of the lubricant that is being sealed. 8R-6941 Outer Plate Thickness of new inner plate ... 4 0.08 mm (0.157 0.003 inch) 6Y-8813 Friction Disc Thickness of new friction disc ... 5.08 0.08 mm (0.2 0.003 inch)Minimum thickness of worn disc ... 4.36 mm (0.172 inch)
Illustration 7 g02416523
(A) Minimum groove depth 0.64 mm (0.025 inch)