CAB GP 4777565 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01237253
Illustration 2 g01237256
Use Tooling (A) and a suitable lifting device in order to position heat exchanger (8) on the side of the engine. The weight of heat exchanger (8) is approximately 51 kg (112 lb). Install bolts (10) .
Illustration 3 g01237255
Install bolts (9) .
Illustration 4 g01237252
Connect hoses (5) , (6) , and (7) .
Illustration 5 g01237251
Connect tube assemblies (3) and (4) .
Illustration 6 g01237249
Connect tube assemblies (1) and (2) .
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".End By: Install the transmission oil cooler and the auxiliary oil cooler. Refer to Disassembly and Assembly, "Oil Cooler (Transmission, Auxiliary) - Remove and Install".