CAB AR 7T7788 - Caterpillar

7T7788 CAB AR Caterpillar parts D8L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7T7788
7T-7788
7T7788

Buy CAB AR 7T7788 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 7T7788:

TRACK-TYPE TRACTOR D8L Caterpillar

For full view, you need register

Information:

Illustration 3 g03823245
Install bearing race (39). Install washer (38). Install bearing (37).
Illustration 4 g06358632
(27) Stator assembly
Install plate (30). Install retaining ring (29).
Install bearing (28A) on to stator race (28). Install stator race (28).
Install cam (31). Install retaining ring (32).
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Note: Springs (33) will be install with the maximum number of loops to the outside.
Install springs (33) with the maximum number of loops to the outside. Install rollers (34). Install plate (35). Install retaining ring (36).
Illustration 5 g03821460
Install stator assembly (27).
Illustration 6 g03821459
Install thrust bearing (26). Install bearing race (25).
Illustration 7 g03821457
Install hub (24). Install turbine (23).
Illustration 8 g03820655
Install backing plate (22) and splined plate (21).
Install friction discs (20) and plates (19) in the same order that was noted during the disassembly procedure.
Illustration 9 g03820654
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retainer plate (17) on hub (16). Install bolts (18). Install springs (15). Install retainer plate (14). Install nuts (13). Tighten bolts (18) to a torque of 50 10 N m (37 7 lb ft).
Illustration 10 g03819290
Install coupling assembly (12). Install hub (11) and bolts (10). Tighten bolts (10) to a torque of 60 7 N m (44 5 lb ft).
Illustration 11 g03819493
Install bearing race (9), thrust bearing (8), and bearing race (7).
Illustration 12 g03819483
Illustration 13 g03819287
Install inner seal ring (5). Install outer seal ring (6). After installation, lubricate inner seal ring (5) and outer seal ring (6) with the oil that is being sealed.
Install clutch piston (4).
Illustration 14 g03819283
Install clutch housing (2). Install D-ring seal (3). Install bolts (1). Tighten bolts (1) to a torque of 60 7 N m (44 5 lb ft).End By:
Install the torque converter.