CABLE AS-GOVERNOR CONTROL 1390045 - Caterpillar

Illustration 1 g01435837
Illustration 2 g01437640
Clean the Windows (1)
This message is located on the upper window in the cab.
Illustration 3 g01069071
See Operation and maintenance Manual, "Windows - Clean" for instructions on cleaning windows.Data Privacy (2)
This message is located on the window on the right side of the cab.
Illustration 4 g01418953
The Product Link System is a satellite communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.Refer to Operation and Maintenance Manual, "Product Link" for more information.Alternate Exit (3)
This message is located on the rear window of the cab.
Illustration 5 g01069768
The rear window serves as an alternate exit.A hammer is mounted in the cab near the rear window. Strike the rear window with the hammer in order to break the glass. Climb through the opening of the rear window in order to exit the cab.Refer to Operation and maintenance Manual, "Alternate Exit" for more information. Adjustable Gauge Undercarriage Frame (4)
This message is located on the front of the track frames of the machine.
Illustration 6 g01110727
ReferenceRefer to the Operation and Maintenance Manual, "Adjustable Gauge Undercarriage Frame" for the procedure in order to adjust the gauge of the tracks.Machine Security System (5)
This message is located on the window on the right side of the cab.
Illustration 7 g01396277
This machine may be equipped with a security system. Read the Operation and Maintenance Manual before you operate the machine.Refer to Operation and Maintenance Manual, "Machine Security System".Counterweight (6)
This message is located underneath the cover on the counterweight.
Illustration 8 g01435946
Do not tighten the counterweight mounting bolts without checking the retainer pin for the proper position.Refer to Operation and Maintenance Manual, "Counterweight Removal and Installation" for more information.Radial Air Cleaner (7)
This message is located on the cover of the air cleaner.
Illustration 9 g01134494
In order to avoid engine damage, replace old filters with radial seal air filters.The location and design of the gasket for the radial seal air filter is critical to the proper operation of the air cleaner element. Use only Caterpillar replacements.Refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".