CABLE AS-NEG 1429842 - Caterpillar

1. Release the air pressure in air tank (7) by opening bleed valves (6) and (8).
Do not disconnect any air lines from the air tank until air pressure is zero.
2. Disconnect lines (2), (3), (4) and (5) from the tank.3. Remove four nuts, washers, grommets and bolts (1) that hold the air tank to the frame. Remove air tank (7) from the machine. The following steps are for installation of the air tank.4. Position the air tank and install four bolts, washers, grommets and nuts (1), that hold the air tank to the frame.5. Connect lines (2), (3), (4) and (5) to the air tank.6. Close bleed valves (6) and (8).