CABLE AS 1774729 - Caterpillar

The machine may tip and personal injury may occur if the maximum load capacities are exceeded. Load capacities assume that the machine is stationary on a level concrete surface with the counterweight extended. Lift capacities will decrease on slopes or soft ground.
Illustration 1 g06298051
(A) Load capacity
(Y) Load overhang per ISO 8813:1922
(C) Rated tipping load lift capacity per ISO 8813:1922
(D) Working range per ISO 8813:1922Note: Do not exceed the lifting capacity in the lift capacity chart that is on the right hand operator console. See illustration 1.The lift capacities are based on a stationary machine with the following specifications:
Table 1
PL61 Pipelayer
Wire rope diameter 16 mm (0.625 inch)
Minimum mechanical strength of the wire rope to breakage 183.34 kN (41200 lb)
3 part load line
3 part boom line
Mass of the extended counterweight 2900 kg (6393 lb)
Standard boom length 5.5 m (18.0 ft)
Total operating weight of the machine 18671 kg (41162 lb) If the lift capacity chart indicates that the lift operation is within the capability of the machine, attempt to perform the operation but proceed with care. Remember that the load may weigh more than the estimate for the load. The lift capacity chart is for estimating the lift operation only.