1790601 CABLE ASSEM. Caterpillar parts
980G
Rating:
Alternative (cross code) number:
CA1790601
179-0601
1790601
CA1790601
179-0601
1790601
Weight: 0.65 pounds 0 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Omix-Ada Omix | 17906.01 | HVAC Heater Plenum Chamber Assembly | OE Reference: 5460038 | Fits 1966-1977 Jeep CJ5 / Commando
Omix-Ada FITMENT | For 1966-1977 Jeep CJ5 / Commando || OE REFERENCE | 5460038 || OMIX 17906.01 | HVAC Heater Plenum Chamber Assembly || WARRANTY | Limited 5-Year Warranty || OMIX | Proudly offering all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part.
Omix-Ada FITMENT | For 1966-1977 Jeep CJ5 / Commando || OE REFERENCE | 5460038 || OMIX 17906.01 | HVAC Heater Plenum Chamber Assembly || WARRANTY | Limited 5-Year Warranty || OMIX | Proudly offering all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part.
$242.99
27 Mar 2024
Amazon.com
Omix-Ada Omix | 17906.01 | HVAC Heater Plenum Chamber Assembly | OE Reference: 5460038 | Fits 1966-1977 Jeep CJ5 / Commando
OMIX FITMENT | For 1966-1977 Jeep CJ5 / Commando || OE REFERENCE | 5460038 || OMIX 17906.01 | HVAC Heater Plenum Chamber Assembly || WARRANTY | Limited 5-Year Warranty || OMIX | Proudly offering all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part.
OMIX FITMENT | For 1966-1977 Jeep CJ5 / Commando || OE REFERENCE | 5460038 || OMIX 17906.01 | HVAC Heater Plenum Chamber Assembly || WARRANTY | Limited 5-Year Warranty || OMIX | Proudly offering all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part.
$242.99
01 Jun 2023
Amazon.com
Omix | 17906.01 | HVAC Heater Plenum Chamber Assembly | OE Reference: 5460038 | Fits 1966-1977 Jeep CJ5 / Commando
Omix-Ada FITMENT | For 1966-1977 Jeep CJ5 / Commando || OE REFERENCE | 5460038 || OMIX 17906.01 | HVAC Heater Plenum Chamber Assembly || WARRANTY | Limited 5-Year Warranty || OMIX | Proudly offering all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part.
Omix-Ada FITMENT | For 1966-1977 Jeep CJ5 / Commando || OE REFERENCE | 5460038 || OMIX 17906.01 | HVAC Heater Plenum Chamber Assembly || WARRANTY | Limited 5-Year Warranty || OMIX | Proudly offering all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part.
Number on catalog scheme:
7
For full view, you need register
Compatible equipment models: 1790601:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M14 x 1.5 by 100 mm 1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D - Guide Studs
M12 x 1.75 by 50 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.e in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M14 x 1.5 by 100 mm 1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D - Guide Studs
M12 x 1.75 by 50 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.e in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Caterpillar parts catalog:
Parts cable Caterpillar catalog:
24H, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777D, 777F, 777G, 824G, 824G II, 82...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M 2, 12K, 12M, 12M 2, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 14M, 160K, 160M, 160M 2, 16M, 2290, 2390, 2391, 2491, 2590, 3126, 3126B, 3126E, 320B, 32...
824G, 825G, 826G, 950G, 962G, 966G, 972G, 980G, IT62G
1539027
CABLE AS
824G, 825G, 980G, 980G II, 980H
824G, 825G, 980G, 980G II, 980H
1154428
CABLE AS
950F II, 960F, 966F II, 970F, 980F, 980G
950F II, 960F, 966F II, 970F, 980F, 980G
950F II, 960F, 966F II, 970F, 980F, 980G
824G, 824G II, 825G, 825G II, 826G, 826G II, 980G, 980G II
1220489
CABLE AS
824G, 824G II, 825G, 825G II, 826G, 826G II, 980G, 980G II
824G, 824G II, 825G, 825G II, 826G, 826G II, 980G, 980G II
824G, 825G, 826G, 980G
1129712
CABLE
980G
980G
1584944
CABLE
980G
980G
1861480
CABLE AS
966G II, 972G II, 980G
966G II, 972G II, 980G
3Y0118
CABLE
950, 966C
950, 966C
4Y6355
CABLE ASSEM.
950G
950G
1622646
CABLE ASSEM.
966G
966G
1627331
CABLE ASSEM.
966G
966G
1622650
CABLE ASSEM.
950G
950G
1622649
CABLE ASSEM.
950G
950G
1176073
CABLE AS
793B, 793C
793B, 793C
4Y4868
CABLE ASSEM.
966F
966F
2822755
CABLE AS
966H
966H
2418248
CABLE AS
980H
980H
2461774
CABLE AS
966H
966H
1994098
CABLE ASSEM.
966G
966G