CABLE - TEST 1U9482 - Caterpillar

Removal Procedure
Start By:
Release the system pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the hydraulic tank. Refer to Operations and Maintenance Manual, "Hydraulic System Oil - Change".
Illustration 1 g06314533
Open access door (1).
Illustration 2 g06314536
Disconnect hose assemblies (2) and (4).
Disconnect harness assemblies (3).
Illustration 3 g06314538
Disconnect hose assemblies (5), (6), and (8).
Disconnect harness assembly (7).
Illustration 4 g06314539
Disconnect hose assemblies (9) and (11).
Remove bolts (10) and tube assembly (12).
Illustration 5 g06314541
Remove bolts (13) and reposition filter assembly (14) out of the way.
Illustration 6 g06322083
Open hood (15).
Illustration 7 g06322086
Remove bolts (17) and cover assembly (16).
Illustration 8 g06314830
Remove bolts (18) and sheet assembly (19).
Illustration 9 g06314832
Remove bolts (20) and reposition harness assembly (21) out of the way.
Illustration 10 g06314833
Remove bolts (23) and sheet assembly (22).
Illustration 11 g06314834
Attach a suitable lifting device to main hydraulic pump (25). The weight of main hydraulic pump (25) is approximately 150 kg (331 lb). Remove bolts (24) and main hydraulic pump (25).Installation Procedure
Install the main hydraulic pump in the reverse order of removal.