2041850 CABLE AS Caterpillar parts
330C L
Rating:
Alternative (cross code) number:
CA2041850
204-1850
2041850
CA2041850
204-1850
2041850
EXCAVATOR,
Compatible equipment models: 2041850:
Number on catalog scheme:
11
For full view, you need register
Information:
Note: For more information on correct removal procedures, refer to the appropriate Disassembly and Assembly manual.
Illustration 12 g02484800
(1) 345-1236 Lifting Bracket (2) 7X-2581 Bolt (3) 9X-8258 Hard Washer (6) Support Plate
Once drum support plate (6) is secure, remove 7X-2581 Bolt (2) and 9X-8258 Hard Washer (3). Unhook overhead lifting device and store tooling properly.Note: For more information on proper tool storage, refer to the Maintenance Section in this manual.Install Drum Support Plate
Attach 345-1236 Lifting Bracket (1) to the threaded hole in support plate (6) using 7X-2581 Bolt (2) and 9X-8258 Hard Washer (3). Tighten the bolt to standard torque.
Illustration 13 g02484996
(1) 345-1236 Lifting Bracket (2) 7X-2581 Hard Washer (6) Support Plate
Use overhead lifting device (5) to lift and position support plate (6) at the machine.
Illustration 14 g02485428
Install two dealer supplied guide bolts (8) in machine frame threaded holes.
Use overhead lifting device to carefully slide support plate (6) onto guide bolts (8) .Note: For more information on correct installation procedures, refer to the appropriate Disassembly and Assembly manual.
Install seven support plate bolts (7) in support plate (6) and tighten securely.Note: All support plate bolts should be tightened to the required specification after guide bolts and lifting bracket are removed.
Illustration 15 g02485617
(6) Support Plate (7) Support Plate Bolts (qty. 7) (8) Guide Bolts
Refer to appropriate Disassembly and Assembly manual for procedures to assemble lower support plate/final drive and drum components.
Remove guide bolts (8). Remove 7X-2581 Bolt (2) and 9X-8258 Hard Washer (3). Move tooling away from the machine.Note: Save 7X-2581 Bolt (2), 9X-8258 Hard Washer (3), and guide bolts (8) for reuse.
Remove 189-0410 Screw Pin Shackle (4) and 345-1236 Lifting Bracket (1) from the overhead lifting device. Store all tooling properly.Note: For more information on proper tool storage, refer to the Maintenance Section in this manual.
Illustration 16 g02487017
Install three remaining support plate bolts (7) in support plate (6). Tighten all ten support plate bolts to standard torque.Note: For more information on correct installation procedures, refer to the appropriate Disassembly and Assembly manual.Maintenance Section
Inspection
Inspect 345-1236 Lifting Bracket (1), screw pin shackle (4), and all related hardware before each use. Immediately replace any worn or damaged components.
Illustration 17 g02487239
Inspect all welds and check for damaged, cracked, or bent components.
Inspect all hardware for damaged threads and cracked or bent components.
Illustration 18 g02487301
Do not use unless all load identification markings are legible.
Illustration 19 g02487357
Do not use if shackle holes and/or bolt hole are elongated.
Have tools inspected annually by an approved dealership inspector. Maintain a written record of all inspections.Cleaning
Clean tools using a non-solvent based cleaner.Storage
Store tools indoors in a clean, dry location, laying flat or hanging from appropriate hooks to prevent falling.Tool Disposal
At the end of the operational life of the tool, destroy the tool and dispose of as scrap.
Illustration 12 g02484800
(1) 345-1236 Lifting Bracket (2) 7X-2581 Bolt (3) 9X-8258 Hard Washer (6) Support Plate
Once drum support plate (6) is secure, remove 7X-2581 Bolt (2) and 9X-8258 Hard Washer (3). Unhook overhead lifting device and store tooling properly.Note: For more information on proper tool storage, refer to the Maintenance Section in this manual.Install Drum Support Plate
Attach 345-1236 Lifting Bracket (1) to the threaded hole in support plate (6) using 7X-2581 Bolt (2) and 9X-8258 Hard Washer (3). Tighten the bolt to standard torque.
Illustration 13 g02484996
(1) 345-1236 Lifting Bracket (2) 7X-2581 Hard Washer (6) Support Plate
Use overhead lifting device (5) to lift and position support plate (6) at the machine.
Illustration 14 g02485428
Install two dealer supplied guide bolts (8) in machine frame threaded holes.
Use overhead lifting device to carefully slide support plate (6) onto guide bolts (8) .Note: For more information on correct installation procedures, refer to the appropriate Disassembly and Assembly manual.
Install seven support plate bolts (7) in support plate (6) and tighten securely.Note: All support plate bolts should be tightened to the required specification after guide bolts and lifting bracket are removed.
Illustration 15 g02485617
(6) Support Plate (7) Support Plate Bolts (qty. 7) (8) Guide Bolts
Refer to appropriate Disassembly and Assembly manual for procedures to assemble lower support plate/final drive and drum components.
Remove guide bolts (8). Remove 7X-2581 Bolt (2) and 9X-8258 Hard Washer (3). Move tooling away from the machine.Note: Save 7X-2581 Bolt (2), 9X-8258 Hard Washer (3), and guide bolts (8) for reuse.
Remove 189-0410 Screw Pin Shackle (4) and 345-1236 Lifting Bracket (1) from the overhead lifting device. Store all tooling properly.Note: For more information on proper tool storage, refer to the Maintenance Section in this manual.
Illustration 16 g02487017
Install three remaining support plate bolts (7) in support plate (6). Tighten all ten support plate bolts to standard torque.Note: For more information on correct installation procedures, refer to the appropriate Disassembly and Assembly manual.Maintenance Section
Inspection
Inspect 345-1236 Lifting Bracket (1), screw pin shackle (4), and all related hardware before each use. Immediately replace any worn or damaged components.
Illustration 17 g02487239
Inspect all welds and check for damaged, cracked, or bent components.
Inspect all hardware for damaged threads and cracked or bent components.
Illustration 18 g02487301
Do not use unless all load identification markings are legible.
Illustration 19 g02487357
Do not use if shackle holes and/or bolt hole are elongated.
Have tools inspected annually by an approved dealership inspector. Maintain a written record of all inspections.Cleaning
Clean tools using a non-solvent based cleaner.Storage
Store tools indoors in a clean, dry location, laying flat or hanging from appropriate hooks to prevent falling.Tool Disposal
At the end of the operational life of the tool, destroy the tool and dispose of as scrap.
Caterpillar parts catalog:
Parts cable Caterpillar catalog:
307D, 311B, 312B, 312B L, 313B, 315B, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 321B, 322B, 322B L, 322B LN, 322C, 322C FM, 325B, 325B L, 325C, 325C FM, 325C L...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 319D ...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H, 16M, 21...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320C, 320C FM, 320C L, 320D...
2035292
CABLE
311D LRR, 311F LRR, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 318C, 320C, 320C L, 321D LCR, 322C, 325C, 330C L
311D LRR, 311F LRR, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 318C, 320C, 320C L, 321D LCR, 322C, 325C, 330C L
1566554
CABLE AS
311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN,...
311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN,...
2130562
CABLE AS
320C FM, 322C, 325C, 330C, 330C L, M325C MH
320C FM, 322C, 325C, 330C, 330C L, M325C MH
1933515
CABLE AS
323D L, 323D LN, 323D SA, 325D L, 325D MH, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D MH
323D L, 323D LN, 323D SA, 325D L, 325D MH, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D MH
2496239
CABLE AS
330C L
330C L
2130910
CABLE AS
330C L
330C L
2041842
CABLE AS
330C L
330C L
2130692
CABLE AS
330C L
330C L
2041846
CABLE AS
330C L
330C L
2130691
CABLE AS
330C L
330C L
2130690
CABLE AS
330C L
330C L
0112994
CABLE CLAMP (33C)
Caterpillar
Caterpillar
2010207
CABLE AS
325C
325C
1506973
CABLE AS
345B L
345B L
2496239
CABLE AS
330C L
330C L
2381688
CABLE AS
330C L
330C L
2041838
CABLE AS
330C L
330C L