2382390 CABLE AS Caterpillar parts
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D ...
Rating:
Alternative (cross code) number:
CA2382390
238-2390
2382390
CA2382390
238-2390
2382390
Weight: 0.11 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 2382390:
EXCAVATOR
311D LRR
311F LRR
312D
312D L
312D2
312D2 GC
312D2 L
313D
313D2
313D2 LGP
315D L
318D L
318D2 L
319D
319D L
319D LN
320D
320D FM
320D FM RR
320D GC
320D L
320D LN
320D LRR
320D RR
320D2
320D2 GC
320D2 L
323D L
323D LN
323D SA
323D2 L
324D
324D L
324D LN
325D
325D L
325D MH
326D L
328D LCR
329D
329D L
329D LN
330D
330D L
330D LN
330D MH
336D
336D L
336D LN
336D2
336D2 L
340D L
340D2 L
345C
345C L
345C MH
345D
345D L
345D L VG
349D
349D L
SHOVEL LOGGER
345C
Number on catalog scheme:
23
For full view, you need register
Information:
all logged diagnostic codes and verify that the repair eliminates the fault.STOP
There is still an XX-4 diagnostic code active with the valve disconnected. - The valve position sensor is OK. Reconnect the suspect valve. Proceed to Test Step 7.Test Step 7. Create an Open Circuit at the 62-Pin Connector
Turn the keyswitch to the OFF position.
Disconnect the 62-pin connector.
Turn the keyswitch to the ON position. Wait for at least 10 seconds for activation of the diagnostic codes.
Use the electronic service tool to check the "Active Diagnostic Code" screen. Check for an XX-3 diagnostic code for the suspect sensor.Note: Diagnostic codes for all of the engine sensors will be active with the 62-pin connector disconnected. Ignore all other codes and only look for codes that relate to the suspect sensor.
Turn the keyswitch to the OFF position.Expected Result:An XX-3 diagnostic code for the suspect sensor is now active.Results:
An XX-4 diagnostic code was active before disconnecting the 62-pin connector. An XX-3 diagnostic code is active with the 62-pin connector disconnected. - The fault is in the wiring between the valve connector and the 62-pin engine interface connector.Repair: Replace the faulty wiring.Use the electronic service tool to clear all logged diagnostic codes and verify that the repair eliminates the fault.STOP
An XX-4 diagnostic code is still active with the 62-pin connector disconnected. - The engine harness is OK. Reconnect the 62-pin connector. Proceed to Test Step 8.Test Step 8. Create an Open Circuit at the ECM Connector
Turn the keyswitch to the OFF position.
Disconnect the P2 connector from the ECM.Thoroughly inspect the P2/J2 connectors for corrosion and/or damaged seals.
Turn the keyswitch to the ON position. Wait at least 10 seconds for activation of the diagnostic codes.
Use the electronic service tool in order to monitor the "Active Diagnostic Code" screen. Check for an XX-3 diagnostic code for the suspect sensor.Note: Diagnostic codes for all of the engine sensors will be active with the P2 connector disconnected. Ignore all other codes and only look for codes that relate to the suspect sensor.Results:
An XX-4 diagnostic code was active before disconnecting the P2 connector. An XX-3 diagnostic code is active with the P2 connector disconnected. - The fault is in the wiring for the suspect sensor between the 62-pin connector and the P2 connector.Repair: Perform the following repair:
Replace the faulty wiring.
Use the electronic service tool in order to clear all logged diagnostic codes and then verify that the repair eliminates the fault.STOP
An XX-4 diagnostic code is still active with the P2 connector disconnected. - The wiring is OK.Repair: Perform the following repair:
Make sure that the latest flash file for the application is installed in the ECM. Refer to Troubleshooting, "Flash Programming".
Contact the Technical Communicator at a Cat Dealer.Note: This consultation can greatly reduce the repair time.
If the Technical Communicator recommends the use of a replacement ECM, install a replacement ECM. Refer to Troubleshooting, "Replacing the ECM".
Use the electronic service tool to recheck the system for active diagnostic codes.
If the fault is resolved with the replacement ECM, reconnect the
There is still an XX-4 diagnostic code active with the valve disconnected. - The valve position sensor is OK. Reconnect the suspect valve. Proceed to Test Step 7.Test Step 7. Create an Open Circuit at the 62-Pin Connector
Turn the keyswitch to the OFF position.
Disconnect the 62-pin connector.
Turn the keyswitch to the ON position. Wait for at least 10 seconds for activation of the diagnostic codes.
Use the electronic service tool to check the "Active Diagnostic Code" screen. Check for an XX-3 diagnostic code for the suspect sensor.Note: Diagnostic codes for all of the engine sensors will be active with the 62-pin connector disconnected. Ignore all other codes and only look for codes that relate to the suspect sensor.
Turn the keyswitch to the OFF position.Expected Result:An XX-3 diagnostic code for the suspect sensor is now active.Results:
An XX-4 diagnostic code was active before disconnecting the 62-pin connector. An XX-3 diagnostic code is active with the 62-pin connector disconnected. - The fault is in the wiring between the valve connector and the 62-pin engine interface connector.Repair: Replace the faulty wiring.Use the electronic service tool to clear all logged diagnostic codes and verify that the repair eliminates the fault.STOP
An XX-4 diagnostic code is still active with the 62-pin connector disconnected. - The engine harness is OK. Reconnect the 62-pin connector. Proceed to Test Step 8.Test Step 8. Create an Open Circuit at the ECM Connector
Turn the keyswitch to the OFF position.
Disconnect the P2 connector from the ECM.Thoroughly inspect the P2/J2 connectors for corrosion and/or damaged seals.
Turn the keyswitch to the ON position. Wait at least 10 seconds for activation of the diagnostic codes.
Use the electronic service tool in order to monitor the "Active Diagnostic Code" screen. Check for an XX-3 diagnostic code for the suspect sensor.Note: Diagnostic codes for all of the engine sensors will be active with the P2 connector disconnected. Ignore all other codes and only look for codes that relate to the suspect sensor.Results:
An XX-4 diagnostic code was active before disconnecting the P2 connector. An XX-3 diagnostic code is active with the P2 connector disconnected. - The fault is in the wiring for the suspect sensor between the 62-pin connector and the P2 connector.Repair: Perform the following repair:
Replace the faulty wiring.
Use the electronic service tool in order to clear all logged diagnostic codes and then verify that the repair eliminates the fault.STOP
An XX-4 diagnostic code is still active with the P2 connector disconnected. - The wiring is OK.Repair: Perform the following repair:
Make sure that the latest flash file for the application is installed in the ECM. Refer to Troubleshooting, "Flash Programming".
Contact the Technical Communicator at a Cat Dealer.Note: This consultation can greatly reduce the repair time.
If the Technical Communicator recommends the use of a replacement ECM, install a replacement ECM. Refer to Troubleshooting, "Replacing the ECM".
Use the electronic service tool to recheck the system for active diagnostic codes.
If the fault is resolved with the replacement ECM, reconnect the
Cat SIS web machinery list:
Parts cable Caterpillar catalog:
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 319D ...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H, 16M, 21...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M 2, 12K, 12M, 12M 2, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 14M, 160K, 160M, 160M 2, 16M, 2290, 2390, 2391, 2491, 2590, 3126, 3126B, 3126E, 320B, 32...
3068641
CABLE AS
345D, 345D L, 345D L VG, 349D, 349D L, 374D L, 390D, 390D L
345D, 345D L, 345D L VG, 349D, 349D L, 374D L, 390D, 390D L
3508037
CABLE AS
336D, 336D L, 336D LN, 336D2
336D, 336D L, 336D LN, 336D2
3508305
CABLE AS
328D LCR
328D LCR
3423064
CABLE AS
336D, 336D L, 336D LN, 336D2
336D, 336D L, 336D LN, 336D2
3423065
CABLE AS
336D, 336D L, 336D LN, 336D2
336D, 336D L, 336D LN, 336D2
3422994
CABLE AS
345D, 345D L, 345D L VG, 349D L
345D, 345D L, 345D L VG, 349D L
3422995
CABLE AS
345D, 345D L, 345D L VG, 349D L
345D, 345D L, 345D L VG, 349D L
3422996
CABLE AS
345D, 345D L, 345D L VG, 349D L
345D, 345D L, 345D L VG, 349D L
345D, 345D L, 345D L VG, 349D L
2677584
CABLE AS
315D L, 319D L
315D L, 319D L
2677583
CABLE AS
315D L, 319D L
315D L, 319D L
3245806
CABLE AS
311D LRR, 312D, 312D L, 313D, 315D L, 318D L, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 315D L, 318D L, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
3191343
CABLE AS
311D LRR, 312D, 313D, 315D L, 318D L, 319D L
311D LRR, 312D, 313D, 315D L, 318D L, 319D L
3191342
CABLE AS
311D LRR, 312D, 312D L, 313D, 315D L, 318D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 315D L, 318D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
2510304
CABLE AS
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L...
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L...
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
2412311
CABLE
312D, 312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320E L, 324E L, 324E LN, 329E L, 330D L, 336D, 336D L, 336D2, 336E L, 336F L, 349E L, 349E L VG, 349F L, 374F L, 390F L
312D, 312D L, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320E L, 324E L, 324E LN, 329E L, 330D L, 336D, 336D L, 336D2, 336E L, 336F L, 349E L, 349E L VG, 349F L, 374F L, 390F L
3191349
CABLE AS
312D, 312D L, 315D L, 319D, 319D L
312D, 312D L, 315D L, 319D, 319D L
3244205
CABLE
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D L, 319D LN
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D L, 319D LN
2964755
CABLE
311D LRR, 312D, 312D L, 314D LCR, 315D L, 319D, 319D L, 319D LN
311D LRR, 312D, 312D L, 314D LCR, 315D L, 319D, 319D L, 319D LN
2382391
CABLE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D ...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D ...