CABLE AS-BRAIDED 2397817 - Caterpillar

1. Install the O-ring seal on plug (44). Install plug (44). 2. Install O-ring seal (43) on plug (42). Install O-ring seal (37) on plug (36). Install ball (41), plunger (40), spring (39) and set screw (38) under plug (36). Install plugs (36) and (42). 3. Install O-ring seal (30) on spool (31). Install O-ring seal (35) on plug (22). Install spool (31), spring seat (32), springs (33) and (34) under plug (22). Install plug (22).4. Install two O-ring seals (23) on spool (24). Install O-ring seal (29) on plug (21). Install spool (24), piston (25), ball (26), plunger (27) and spring (28) under plug (21). Install plug (21). 5. Install O-ring (20) on plug (7). Install two O-ring seals (18) on spool (19). Install two springs (16), two pistons (17) and spool (19). Install plug (7).6. Install O-ring seal (15) on plug (8). Install two spacers (9), washer (10), O-ring seal (11), plunger (12), piston (13), spring (14) and plug (8). The placement of two springs (16) and two pistons (17) is important to the proper functioning of the valve. Ensure that assembly is exactly as shown. 7. Install two bolts (6), the washers and the mounting bracket. Install fitting (5). Install the O-ring seal to the fitting. 8. Install fitting assemblies (1), (2), (3) and (4). Install the O-ring seals to the fittings. End By:a. Install the brake accumulator charging valve. Refer to Disassembly and Assembly, "Accumulator Charging Valve (Brake) - Install" for the machine that is being serviced.