CABLE AS 2400465 - Caterpillar

Single UPS
Illustration 1 g02143224
(3) Slot for the relay communications card (4) Open slots for the optional communication cards. (6) Screw-type terminal block used for connecting the contacts and the coils of the two external battery circuit breakers "XMB07" and "XMB08" (7) Screw-type terminal block used for the connection of the remote emergency power off "REPO" "XMB06".
Ensure sufficient isolation of power, control, and communication cables. Run the communication cables separately from the power cables. Reinforce the insulation of the control and communication cables if any risk of contact with the power cables exists. Running the cables together may cause unintentional contact with live power cables resulting in serious personal injury or death.
Separate the control and communication cables from the power cables.
Route the cables together in front of the protection panels.
Using cable straps, secure the cables to the panels as indicated by the arrows in Illustration 1 .
Table 1
Description of the Cable     Insulation Level     Callout (1)    
Relay Communication Card     SELV     3    
Optional Communication Card     SELV or LV     4    
Circuit Breaker Cables for the External Battery     SELV     6    
General Shutdown Cable     SELV     7    
( 1 ) Refer to Illustration 1.Parallel UPS
Illustration 2 g02143228
(1) Connectors for auxiliary interconnections of parallel UPS units (INTN PCA), optional (3) Slot for the relay communications card (4) Free slots for the optional communication cards. (6) Screw-type terminal block used for connecting the contacts and the coils of the two external battery circuit breakers "XMB07", "XMB08" (7) Screw-type terminal block used for the connection of the remote emergency power off "REPO" "XMB06".
Ensure sufficient isolation of power, control, and communication cables. Run the communication cables separately from the power cables. Reinforce the insulation of the control and communication cables if any risk of contact with the power cables exists. Running the cables together may cause unintentional contact with live power cables resulting in serious personal injury or death.
Separate the control and communication cables from the power cables.
Route the cables together in front of the protection panels.
By using cable straps, secure the cables to the panels as indicated by the arrows in Illustration 2.
Table 2
Cable description    Insulation level    Callout (1)    
External bypass cabinet cable     ELV     1    
CAN cables     SELV     1    
Exchange-current cables     SELV     1    
Relay communication card     SELV     3    
Optional communication card     SELV or LV     4    
External battery circuit-breaker cables     SELV     6    
General-shutdown cable     SELV     7    
( 1 ) Refer to Illustration 2.