CABLE AS 2563103 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     3    
B     1U-9200     Lever Puller Hoist     1    
Illustration 1 g00495593
Position the torque converter under the tractor. Install Tooling (A) and Tooling (B) and raise the torque converter into position.
Illustration 2 g00495595
Illustration 3 g00495594
Install 12 bolts (9) and bracket (10) .
Illustration 4 g00495591
Install strap (8) .
Illustration 5 g00495590
Connect cooler hose assemblies (6). Install clips (7) .
Illustration 6 g00495589
Install the O-ring seals on sleeve (5). Install the sleeve and elbow (4) .
Illustration 7 g00495588
Connect hose assemblies (3) .
Illustration 8 g00495587
Install the screen and connect hose assembly (1) .
Install drain plug (2). Add the oil that is needed to fill the system. Refer to the Operation and Maintenance Manual, "Lubricant Viscosities" for the type of oil. Refer to the Operation and Maintenance Manual, "Refill Capacities" for the capacity of the system. End By:
Install the torque converter outlet relief valve. Refer to Disassembly and Assembly, "Torque Converter Outlet Relief Valve - Install".
Install the main drive shaft. Refer to Disassembly and Assembly, "Main Drive Shaft - Remove and Install".