CABLE AS-BATTERY 3502555 - Caterpillar

Slowly loosen remaining bolts (3). Springs inside the differential will force cover (4) to separate from differential case (2) .
Remove bolts (3) from the housing.
Remove cover assembly (4) from differential case (2) .
Illustration 4 g00975068
Position cover assembly (4) upside-down, as shown.
Remove flat head screws (5) from plate (6) .
Remove plate (6) from cover assembly (4) .
Illustration 5 g00975070
Remove cover assembly (4) from thrust ring (7) .
Remove flat head screws (8) .
Remove thrust washer (9) from cover assembly (4) .
Illustration 6 g00975072
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove springs (10) from differential case (2) .
Remove friction discs (11) from differential case (2) .
Illustration 7 g00975074
Remove bevel gear (12) from differential case (2) .
Illustration 8 g00975075
Install Tooling (B) and a suitable lifting device, as shown.
Remove bolts (13) in order to separate differential case (2) .
Use a suitable lifting device to separate the bevel gear and differential case from the rest of the differential case. The weight of the bevel gear and differential case is approximately 68 kg (150 lb).
Illustration 9 g00975076
Remove side gear (14) from spider assembly (15) .
Remove the spider assembly (15) from differential case (2) .
Illustration 10 g00975077
Remove washer (16), spider gear (17), and sleeve bearing (18) from spider (19) .
Illustration 11 g00975078
Remove bolts (20) that secure the bevel gear to the differential case.
Illustration 12 g00975079
Install Tooling (C) and place the assembly in a suitable press, as shown.
Illustration 13 g00975080
Press the bevel gear (21) off the differential case (2) .
Illustration 14 g00975081
Install Tooling (D), as shown.
Use Tooling (D) to remove bearing cone (22) from differential case (2) .
Illustration 15 g00975083
Remove flat head screws (23) .
Remove thrust washer (24) from differential carrier (2) .