CABLE AS-BATTERY 3747948 - Caterpillar

Fine Swing Control - Push down on the top of the switch to activate the fine swing control.When the fine swing control is ON, the swing parking brake will not activate until 6.5 seconds after the joystick control for the swing function returns to the neutral position. Fine swing control improves swing control during deceleration of a swing because this will allow the swing to drift instead of stopping the swing abruptly. This combination of drift and the delay of the engagement of the swing parking brake may be helpful during certain types of lifting operations.Push down on the bottom of the switch to turn off the fine swing control. Operate the machine with the fine swing control in the OFF position when the machine is on a slope. Operate the machine with the fine swing control in the OFF position when great swing forces are required. For example, digging on a sidewall requires great swing force. Operate the machine with the fine swing control in the OFF position to control the motion with the swing brake.Lower Window Wiper and Window Washer (23-24)
Lower Window Wiper (23) - Push down on the top of the switch to turn on the lower window wiper. Push down the bottom portion of the switch to turn off the lower window wiper.
Lower Window Washer (24) - Push down on the top of the switch and keep the switch depressed to activate the lower window washer. While the switch is depressed, the washer fluid will spray from the nozzle.
If the wiper does not operate with the switch in the ON position, turn the switch off immediately. Check the cause. If the switch remains on, motor failure can result.
If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.
Radio Mute (25)
Mute Function - If equipped, press the top of the switch to turn on the mute function for the radio. Press the bottom of the switch to turn off the mute function for the radio.Overload Warning Device (26)
The rocker switch that activates the alarm for the overload warning device is located on the right side instrument panel.
Illustration 14 g01615363
Overload Warning Device - In lifting applications, the overload warning device activates a buzzer when there is an unstable load condition. When this occurs, the bucket load should be reduced or the stick should be moved inward.
ON - Push the right side of the switch to activate the overload warning device.
OFF - Push the left side of the switch to deactivate the overload warning device.Seat Heater (27)
Preexisting skin conditions can be aggravated by continued use of the seat heater. If skin condition worsens, discontinue use of the seat heater.
Seat Heater - In cold weather, the seat heater can be activated to improve operator comfort.
ON - Push down on the top of the seat heater switch to activate the seat heater.
OFF - Push down on the bottom of the seat heater switch to deactivate the seat heater.
Do