CABLE-BATTERY 3784785 - Caterpillar

Load the TecJet 50 software onto your PC:1. Connect the laptop with cable to the PC connector, which is connected to the TecJet 50 connector. This will enable monitoring of the TecJet 50.2. Insert the "TecJet 50 Software" disk into your drive A.3. Start MS-DOS or the Window Explorer and go to drive A to copy the TecJet 50 files.4. Copy the files Tjmon.exe, Tjmon.c16, and Tjmon.h16 to your personal directory.5. Go to the Tjmon.exe file and press Enter or double click. The TJMON display will appear on the screen, as shown in Figure 3-2.6. Go to the "Flow Input" window and select the type of flow command for your TecJet 50 (Analog, PWM, CAN, etc.).Having loaded the monitoring program onto your PC, proceed by following the on-screen instructions. For further explanation of the TecJet 50 monitoring program, see the following section, Description of TecJet 50 Monitoring Program.
Figure 3-1. Example of Wiring Connections that Facilitate Monitoring of the TecJet 50.