CABLE AS 3C8193 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-3931     Anti-Seize Compound     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Apply Tooling (A) on the threads of the mounting studs for the turbocharger.
Illustration 1 g01181699
Position gasket (7) and turbocharger (5) on the exhaust manifold. Install locknuts (6) .
Tighten the locknuts to a torque of 54 5 N m (40 4 lb ft).
Illustration 2 g01181690
Connect tube assembly (3) and tube assembly (2) .
Connect hose (4) and hose (1) .
Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".