3E1804 CABLE AS Caterpillar parts
834B, 836, 988B, 988F, 988F II
Rating:
Alternative (cross code) number:
CA3E1804
3E-1804
3E1804
CA3E1804
3E-1804
3E1804
Weight: 2 pounds 1 kg.
Information:
LENGTH
2032
mm
MINIMUM BEND RADIUS
152
mm
TRAVEL
50.8
mm
LANDFILL COMPACTOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$54.80
26 Jul 2022
US: Florida-Parts-Z
3E1804 - Cable AS 9K4940 for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$25.36
24 May 2021
9.0[4.05] Pounds
US: QUALITY PARTS
Made to fit 3E1804 Cable 3E1804 CATNEW Aftermarket
G&T Engine Parts 3E1804 Made to fit CAT (3E1804 Caterpillar) || Meets OEM Specs for Fit and Performance || This is a new item 3E1804 Cable 3E1804 || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 3E1804 Made to fit CAT (3E1804 Caterpillar) || Meets OEM Specs for Fit and Performance || This is a new item 3E1804 Cable 3E1804 || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
$37.09
24 May 2021
US: QUALITY PARTS
Made to fit 3E1804 Cable 3E1804 CAT New Aftermarket
G&T Engine Parts 3E1804 Made to fit 3E1804 CAT || Meets OEM Specs for Fit and Performance || This is a new item CAT Cable 3E1804 || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 3E1804 Made to fit 3E1804 CAT || Meets OEM Specs for Fit and Performance || This is a new item CAT Cable 3E1804 || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
20
For full view, you need register
Compatible equipment models: 3E1804:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
C 1P-0510 Driver Gp 1
D 7N-8268 Installation Tool 1
E 438-8155 Installation Tool 1 Reference: Refer to Reuse and Salvage Guidelines, SEBF8418, "Salvage of Water Pumps in 3500 Series Engines" for reuse and salvage guidelines.
Illustration 1 g06133754
Install filters (15) into pump housing (10).
Illustration 2 g06133753
Install ring (14) and the locating pin.
Use Tooling (C) to install lip seal (13) into pump housing (10).
Illustration 3 g06133750
Install shaft assembly (8), thrust washer (9), bolts (7), and the washers into pump housing (10).
Illustration 4 g06133755
Illustration 5 g03476619
Use Tooling (D) to install stationary seal group (11) with the ceramic side facing out.
Illustration 6 g06133756
Illustration 7 g06133757
Use Tooling (E) and a suitable press to install rotating seal group (6). Rotating seal group (6) is to be installed with installation clips (X) in place until rotating seal group (6) is fully seated. Remove installation clips (X).Note: Do not use hammer to install seal groups as damage to the ceramic faces on the seal groups will occur.
Illustration 8 g06133758
Lubricate the shaft assembly with a light coat of engine oil. Use a suitable press to install impeller (5) into pump housing (10) and onto the shaft assembly. Install impeller (5) to a depth of 0.0 0.15 mm (0.00000 0.00591 inch) from the end of the shaft assembly to the outer face of the impeller.Note: Support the shaft assembly to prevent damage to the thrust washer.
Illustration 9 g06133759
Install plug assembly (12) and the O-ring seal into pump housing (10).
Illustration 10 g03475339
Install O-ring seal (4) and O-ring seal (3) onto cover assembly (2).
Illustration 11 g03475023
Install cover assembly (2), the studs, and nuts (1). Tighten the studs to a torque of 35 5 N m (25 3 lb ft). Tighten nuts (1) to a torque of 27 5 N m (19 3 lb ft).End By:
Install the water pump.
Table 1
Required Tools
Tool Part Number Part Description Qty
C 1P-0510 Driver Gp 1
D 7N-8268 Installation Tool 1
E 438-8155 Installation Tool 1 Reference: Refer to Reuse and Salvage Guidelines, SEBF8418, "Salvage of Water Pumps in 3500 Series Engines" for reuse and salvage guidelines.
Illustration 1 g06133754
Install filters (15) into pump housing (10).
Illustration 2 g06133753
Install ring (14) and the locating pin.
Use Tooling (C) to install lip seal (13) into pump housing (10).
Illustration 3 g06133750
Install shaft assembly (8), thrust washer (9), bolts (7), and the washers into pump housing (10).
Illustration 4 g06133755
Illustration 5 g03476619
Use Tooling (D) to install stationary seal group (11) with the ceramic side facing out.
Illustration 6 g06133756
Illustration 7 g06133757
Use Tooling (E) and a suitable press to install rotating seal group (6). Rotating seal group (6) is to be installed with installation clips (X) in place until rotating seal group (6) is fully seated. Remove installation clips (X).Note: Do not use hammer to install seal groups as damage to the ceramic faces on the seal groups will occur.
Illustration 8 g06133758
Lubricate the shaft assembly with a light coat of engine oil. Use a suitable press to install impeller (5) into pump housing (10) and onto the shaft assembly. Install impeller (5) to a depth of 0.0 0.15 mm (0.00000 0.00591 inch) from the end of the shaft assembly to the outer face of the impeller.Note: Support the shaft assembly to prevent damage to the thrust washer.
Illustration 9 g06133759
Install plug assembly (12) and the O-ring seal into pump housing (10).
Illustration 10 g03475339
Install O-ring seal (4) and O-ring seal (3) onto cover assembly (2).
Illustration 11 g03475023
Install cover assembly (2), the studs, and nuts (1). Tighten the studs to a torque of 35 5 N m (25 3 lb ft). Tighten nuts (1) to a torque of 27 5 N m (19 3 lb ft).End By:
Install the water pump.
Caterpillar parts catalog:
Parts cable Caterpillar catalog:
416, 416B, 416C, 426B, 426C, 428, 428B, 428C, 436, 436C, 438B, 438C, 446, 446B, 446D, 517, 527, 561M, 561N, 572R, 589, 814B, 814F, 815B, 815F, 816F, 834B, 943, 950B, 950B/950E, 950F, 950F II, 953, 953...
988B
834B, 988B
834B, 836, 988B
988B
1281124
CABLE AS
834B, 836, R1700G
834B, 836, R1700G
1281461
CABLE AS
836, 966F II
836, 966F II
1281122
CABLE AS
834B, 836
834B, 836
1281123
CABLE AS
834B, 836
834B, 836
1281125
CABLE AS
834B, 836
834B, 836
8V7732
CABLE ASSEM.
834B
834B
834B
834B, 836, 988B
834B, 988B
834B, 836, 988B
834B, 836, 988B
988B
7V1559
CABLE AS
834B, 988B
834B, 988B
8R4186
CABLE AS
980C, 980F, 980F II
980C, 980F, 980F II
8R4188
CABLE AS
980C
980C
8R4187
CABLE AS
980C, 980F, 980F II
980C, 980F, 980F II
8R4185
CABLE AS
980C
980C
3V8716
CABLE AS
980C, 980F, 980F II
980C, 980F, 980F II
5R3231
CABLE AS
980C, 980F, 980F II
980C, 980F, 980F II